Car Racks

12 x 100mm fork adapter for use with 9mm fork-mount bike racks. - 12mm x 100mm - Axle not included. Works with your bike's thru-axle - Built-in safety tabs - Durable black powder-coat finish - All Yakima thru-axle ForkAdapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts Product Specs: - Weight: 0.41 lbs. - Dimensions: L 4.50 in x W 1.25 in x H 4.00 in - Limited Lifetime Warranty

This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any 9mm fork-style bike mount. - 15mm x 110mm - Axle is not included. Works with your bike's thru-axle - Built in safety tabs - Durable black powder-coat finish - All Yakima thru-axle Fork Adapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts Product Specs: - Weight: 0.40 lbs. - Dimensions: L 4.50 in x W 1.25 in x H 4.00 in - Limited Lifetime Warranty

Make just about any accessory lockable with an SKS accessory housing. Use with bike, boat or BasketCase accessories that don't accept SKS lock cores. SKS lock cores sold separately. - Lock rack accessories to your vehicle's crossbar - Use with bike, boat, and BasketCase accessories - SKS Lock Cores sold separately Product Specs: - Weight: 0.20 lbs. - Dimensions: L 4.00 in x W 3.25 in x H 1.00 in - Limited Lifetime Warranty

Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)

Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

No rails? No problem. The versatile BaseLine’s intelligent design and advanced adjust ability help it morph to the shape of your car’s roof for a sleek, secure, load-it-up fit. - Secure, easy-to-use tower specifically designed for cars without roof rails or gutters - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - Tri-axial DropHook clip adjustment easily adjusts to a wide range of roof shapes for safe, secure hold - BarBed has 12° of pitch adjustment to optimize tower position and level bars on rounded roofs - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with our SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Dimensions: L 5.00” x W 6.00” x H 4.00”

Yakima's BedHead offers an affordable, no-drill solution for carrying a bike by its fork in the bed of your truck. Durable and corrosion-resistant, the BedHead quickly installs onto the interior lip of your truck bed's rail as shown. A beefy, long-throw (so you don't have to unscrew it to install the bike) 9mm-diameter skewer holds your bike fast. Padding protects your truck’s finish, too.

When you've got a tough racking dilemma, what you really need is Yakima's BlockHead. This handy device securely holds your bike by the fork with a rugged, 9mm-diameter skewer. The BlockHead is made of anodized aluminum and bolts to your pickup, RV or practically anywhere (use your imagination for hundreds of other bike-storage possibilities).

Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)

- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - Weight: 0.44 lbs. - Dimensions: L 15.50 in x W 1.00 in x H 18 in

The FatCat EVO is our sleekest, quietest, and sweetest ski & snowboard mount. It is wide enough to carry four pairs of powder skis—up to 136mm at the tip—or two snowboards. FatCat EVO mounts tool-free on virtually any roof rack. SKS locks are built in for added security. For T-Slot crossbars, add the SmarT-Slot Kit 2 for a super-sleek setup (sold separately). - Easily carries four pair of skis—up to 136 mm wide at the tip—or two snowboards - Aerodynamic design delivers a quiet ride and streamlined good looks - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Integrated SkiLift provides clearance for tall bindings - DoubleJoint hinge expands for easy use with thick skis and boards - Large button makes it easy to open with gloves or mittens on - Sleek mirror-black finish looks great on your roof - Integrated SKS (Same Key System) locks included - Compatible with T-slot crossbars—just add our SmarT-Slot Kit 2 (sold separately) Product Specs: - Weight: 10.00 lbs. - Dimensions: L 30.50 in x W 3.75 in x H 5.25 in - Minimum Crossbar Spread 12.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty

This fork adapter allows you to put your thru-axle fork on any 9mm fork-mounted bike rack. - Axle not included. Works with your bike's thru-axle - Fits all fork bike mounts including, Yakima, Thule, Rocky Mounts, etc. - Built-in safety tabs - Durable black powder-coat finish Product Specs: - Weight: 0.32 – 0.38 lbs. - Minimum Crossbar Spread 16in - Maximum Crossbar Spread 42in - Limited Lifetime Warranty

Yakima's Fork Adapter allows you to attach your through-axle fork to your fork-mounted rack quickly and easily. The tall arms give your brake caliper room to clear the tray, too.

Friends will double-take when they see our most versatile, aerodynamic bike mount on your car. It carries your complete bike—no wheel removal needed. The universal mounting system fits nearly any crossbars you can think of. - Fits Yakima round, square, factory or aerodynamic crossbars - Zero contact with frame; carbon fiber and custom paint jobs are protected - Accommodates disc brakes, thru axles, and full suspension bikes - Holds bike upright while you secure the bike to the mount - Leave your front wheel on for easy loading (some fenders may need to be removed to transport bike) - No tools or assembly required - Fits 20" to 27.5" wheels with tire widths up to 3" and 29" wheels with tires widths up to 2.7" - SKS Locks sold separately - 1 bike, up to 40 lbs at min of 18" crossbar spread; or up to 30 lbs at min of 16" crossbar spread - Accommodates bike wheelbases up to 48" Product Specs: - Weight: 13.00 lbs. - Dimensions: L 56.00 in x W 7.00 in x H 7.50 in - Minimum Crossbar Spread 16.00in - Maximum Crossbar Spread 42.00in - Limited Lifetime Warranty

A fresher take on the classic strap rack, the Yakima FullBack 3 securely holds your bike, is simple to use, stores easily, installs easily, and is easy on the wallet. The construction is rugged, the modern design is as cool as your ride, a locking package deters bike theft, and there’s a built-in bottle opener. Cheers. - New SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Modern design delivers an improved fit and looks awesome - Bomber external frame holds tough, cushy padding protects your paint - Full SKS locking package secures rack to vehicle, bikes to rack to help prevent theft - Simple installation with an interlocking HUB that aligns key adjustment points - Four-strap attachment is intuitive and easy - Compact for easy storage - Premium high-gloss finish - Yakima signature bottle opener lets you enjoy a post-ride cold one - Easy number dial makes installation simple - Number of Bikes 3 TECHNICAL SPECS - Weight: 23.00 lbs - Dimensions: L 30.00” x W 25.00” x H 22.00”

The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck’s tailgate while the soft felt backing keeps your truck’s paint protected. Integrated SitTight bike cradles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top. - Tailgate pad for your truck that securely carries your bikes to the trailhead - NEW Cushioned SitTight cradles protect bikes from shifting and sliding - NEW HindSight cover tucks out of the way so your back-up camera can do its job - NEW Velcro cradle closure system is easy on carbon bike frames and painted surfaces - Rugged nylon outer material resists abrasion and weather damage - Extra soft felt backing protects your truck’s paint job - Integrated strap management system keeps the pad tight and secure on the way up the mountain - Medium size has a 5 bike capacity and fits mid-size & some older full-size trucks - Large size has a 6 bike capacity and fits most full-size trucks - Medium Dimensions: 53-inch Long x 5-inch Wide x 17-inch Tall - Large Dimensions: 62-inch Long x 7-inch Wide x 20-inch Tall

Super simple and built to last, the new HangOut 3offers grab-and-go bike carrying convenience for almost any vehicle. The adjustable strap system and QuickTrigger hub make installation easy, and the padded feet and coated metal buckles protect your vehicle’s paint. Integrated StableCradles secure your bikes for a confident carry and make loading and unloading a piece of cake. When you aren’t off adventuring, the HangOut folds flat for compact storage. - QuickTrigger hub system makes install easy and fast - Integrated StableCradles hold bikes firmly in place - Padded feet and coated metal buckles protect your vehicle - Available in two or three bike carrying capacities - Arms fold for compact storage - Number of Bikes: 3 TECHNICAL SPECS - Weight: 16.00 lbs - Dimensions: L 27.50” x W 21.50” x H 11.25”

Perfect for tour operators, group rides and big families. Constructed of heavy-duty steel, our first-ever vertical bike rack safely hauls up to four mountain bikes to the trailhead. We designed and tested it in the lab and on the road to meet our demanding Yakima standards. The easy-to-operate tilt mechanism with two adjustable mast angles keep your bikes from bumping into your car, truck or SUV and makes accessing the tailgate a breeze. The HangOver’s vertical orientation carries more bikes in less space. Get ready to session! Product Details: - Transports up to 4 bikes using minimal space 37.5 lbs max per bike - Foot-operated tilt mechanism changes rack position for easy loading and unloading - Tilts down and out of the way for easy rear-of-vehicle access - Securely supports bikes by the fork crown - Fits suspension-fork bikes only - Fits fat bike suspension forks - Soft padding protects the fork’s finish - Rotating wheel cup accommodates bikes with various wheelbases - 2 mast height positions for improved ground clearance and ease of loading - 2 mast angles to avoid bike-tire contact with your vehicle - HitchLock included - Built-in bottle opener, cheers! - Fits 2" hitch receivers only - Compatible with the sold separately BackSwing - Add your own bike lock to the integrated lock loop for greater bike security Product Specs: - Weight: 65.00 lbs - Dimensions: L 22.00in x W 46.00in x H 60.00in - Some assembly required, 10 minute install - 2" hitch receiver required

All your bikes, all at once. The HangTight is designed for versatility, built to handle adventures of all sorts, and won’t blink at anything from kids to fat bikes to road to mountain bikes and everything in between. With fully padded cradles that support each bike by the handlebars, it serves up a shuttle-ready blend of stability and ease of use. The HangTight will get your bikes to the ride and back home safely no matter if your crew is a mix of all-mountain shredders or simply a family headed out for two-wheeled exploration.

There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.

This handy add-on doubles your HoldUp bike hitch carrier's capacity from 2 to 4 bikes—perfect for quadruplets on a family outing. Holds up to two bikes. - Expands your bike-hauling capacity from 2 to 4 bikes - StrongArm design secures bike at wheels, protecting paint and carbon frames - Fits 20" – 27.5" wheel sizes with tires up to 3.0" wide and 29" tires up to 2.5" wide - Accommodates bike wheelbases up to 48" - Accommodates disc brakes, through axles, and full suspension bikes - Tilts down with bikes loaded for rear-of-vehicle access - Side-to-side adjustability to adjust space between bikes - Carries 2 bikes (2" receiver only) - 4 bikes, 200 lbs total, with the HoldUp Product Specs: - Weight: 49.00 lbs. - Dimensions: L 56.50 in x W 64.00 in x H 12.00 in - Limited Lifetime Warranty

Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.

Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish.You select the right model Landing Pad for your vehicle

Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish.You select the right model Landing Pad for your vehicle.

Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish.You select the right model Landing Pad for your vehicle.

Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish.You select the right model Landing Pad for your vehicle.

Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish.You select the right model Landing Pad for your vehicle.

Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish.You select the right model Landing Pad for your vehicle.

Put down the drill, you don't need it. This fork mount attaches to the inside lip of your truck bed easily and comes with a locking skewer so you can leave your bike in your bed with confidence that it will be there when you come back. - Truck-bed bike fork mount that allows you to attach your bike to the inside lip of your truck bed rail without any drilling - Fits bikes with 9mm x 100mm front hubs - Locking single-sided adjustment skewer with long throw for easy bike loading. SKS Lock Core included. - Corrosion-resistant anodized aluminum construction - Soft padding to protect your vehicle's paint job Product Specs: - Weight: 2.20 lbs. - Dimensions: L 3.00 in x W 1.50 in x H 4.00 in - Limited Lifetime Warranty

If you've got a truck bed or pretty much anywhere you can insert a couple bolts, you've got yourself a place to install this handy fork-style bike mount. This one comes with a locking single-sided adjustment skewer so you can secure your bike easily. Includes SKS lock core and two SKS keys. - A "bolt anywhere" fork-style bike mount - Fits bikes with 9mm x 100mm front hubs - Locking single-sided adjustment skewer with long throw for easy bike loading. SKS Lock Core included - Corrosion-resistant anodized aluminum construction Product Specs: - Weight: 1.45 lbs. - Limited Lifetime Warranty

Bar adapter that allows you to run RoundBar on StreamLine Towers.

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 4 SKS Cores and matching keys - 2 keys included plus a control key

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 6 SKS Cores and matching keys - 2 keys included plus a control key

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 8 SKS Cores and matching keys - 2 keys included plus a control key

Includes a single SKS key.

Long, narrow and sleek, Yakima's SkyBox 16 safely totes your gear. It sports a rugged and spacious design and a smooth, aerodynamic profile. Plus, with no-assembly, rapid-fire mounting hardware and dual-sided, spring-loaded openings, it's easy to get this box on and off, and opened and closed. The universal mounting hardware fits round and square crossbars, plus many factory racks, too. Specs - Dimensions: 81 x 36 x 15 inches - Capacity: 16 cubic feet - Yakima SKS locks included - Minimum crossbar spread: 24 inches - Weight: 47 pounds

Long, narrow and sleek, Yakima's SkyBox 18 safely totes your gear. It sports a rugged and spacious design and a smooth, aerodynamic profile. Plus, with no-assembly, rapid-fire mounting hardware and dual-sided, spring-loaded openings, it's easy to get this box on and off, and opened and closed. The universal mounting hardware fits round and square crossbars, plus many factory racks, too. - Dimensions: 92 x 36 x 16 inches - Capacity: 18 cubic feet - Yakima SKS locks included - Weight: 52 pounds

Long, narrow and sleek, Yakima's SkyBox 21 safely totes your gear. It sports a rugged and spacious design and a smooth, aerodynamic profile. Plus, with no-assembly, rapid-fire mounting hardware and dual-sided, spring-loaded openings, it's easy to get this box on and off, and opened and closed. The universal mounting hardware fits round and square crossbars, plus many factory racks, too. - Dimensions: 92 x 36 x 18 inches - Capacity: 21 cubic feet - Yakima SKS locks included - Weight: 62 pounds

Roll your own way – the SkyLine Towers work with our Landing Pads to create a customizable, mega-versatile, super easy-to-use system that easily handles your unique personality and extensive range of gear. - Complete SkyLine Tower set - Secure and simple – may be the easiest-to-use rack system out there - Fits all styles of Landing Pad (required) - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - BarBed has 12° of pitch adjustment to optimize tower position and level bars on roofs with curved flush rails - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating TECHNICAL SPECS - Weight: 1.00 lbs - Dimensions: L 4.50” x W 4.50” x H 3.00”

The StageTwo is built to carry your valuable steeds anywhere you need to go, securely and in style. From road to mountain and kids to fat bikes the StrongArm hook quickly secures your bike. The stadium seating tiered architecture increases ground clearance on rutted trails or steep driveways. While the offset tray design further minimizes bike to bike interference and maximizes functionality. The Tool-free locking SpeedKnob™ 2.0 makes install easier than ever, and the forward-facing remote tilt lever means fast access to the rear of your vehicle and integrated locking cables, combined with the ability to add your own lock, provide serious security. - Tiered and adjustable bike trays minimize bike to bike interference and maximize ground clearance? - StrongArm™ hook secures bike at wheels, protecting painted surfaces and carbon frames - Convenient remote tilt lever for easy rear of car access - Tool-free locking SpeedKnob for secure and simple instillation and removal - Offset Trays for extra bike to bike clearance - Fits most bikes, including fat-tire, mountain, road, hybrid, women’s specific, BMX, kids’ bikes, & E-bikes up to 60 lbs. each - Fits 16” to 29” wheel sizes and tires up to 3.25” wide and up to 5" wide with the StageTwo Fat Bike Kit (Sold Separately) - Accommodates bike wheelbases up to 52” - Integrated SKS (Same Key System) locks included to secure bikes to rack and rack to vehicle receiver - Tilts forward with bikes loaded for trunk access - Add your own bike lock to the integrated lock loop for greater bike security - Available in two sizes: 1.25” hitch receivers & 2” hitch receivers - Carry four bikes – just add the StageTwo 2 (compatible with 2” version only) - Available in two colorways, Anthracite and Vapor (2" only) - RV and Off-Road rated to 36lbs per bike

Two plus two equals more: More bikes, more adventure, and more fun. Adding on the StageTwo +2 lets you double your capacity to four bikes, each carried securely and in style. The stadium seating architecture increases ground clearance on rutted trails or steep driveways and its offset tray design further minimizes bike to bike interference and maximizes functionality. The forward-facing remote tilt lever means fast access to the trunk area and integrated locking cables combine with your own lock to provide serious security. - Attaches to the 2” StageTwo to carry two additional bikes?Tiered and adjustable bike trays minimize bike to bike interference and maximize ground clearance - StrongArm™ hook secures bike at wheels, protecting painted surfaces and carbon frames - Convenient remote tilt lever for easy rear of car access - Offset Trays for extra bike to bike clearance - Fits most bikes, including fat-tire, mountain, road, hybrid, women’s specific, BMX, kids’ bikes, & E-bikes up to 60 lbs. each - Fits 16” to 29” wheel sizes and tires up to 3.25” wide and up to 5" wide with the StageTwo Fat Bike Kit (Sold Separately) - Accommodates bike wheelbases up to 52” - Integrated SKS (Same Key System) locks included for added bike security - Add your own bike lock to the integrated lock loop for greater bike security - Compatible only with 2" version of StageTwo - Available in two colorways, Anthracite and Vapor

Extend your capacity–the TimberLine attaches to factory racks with raised side rails to expand your carrying capacity and deliver maximum rooftop versatility. Secure and super-sleek, they are quiet, simple to install and work with all of Yakima's bars. - Complete set of TimberLine Towers - The totally new Yakima tower for vehicles with raised side rails. - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - Strong, durable stainless steel strap to accommodates a range of rails - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with Yakima's SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower TECHNICAL SPECS - Weight: 5.00 lbs - Dimensions: L 6.00” x W 3.50” x H 3.00”

Have an older Yakima mount but have aero or factory crossbars? No problem. This is the simple and economical way to adapt classic Yakima mounts to just about any size and shape crossbar. The Dynaflex padding to provide all the extra protection and grip you need. Come in sets of four. - Simple, economical way to attach classic RoundBar only Yakima mounts to your factory or aerodynamic roof rack system - Dynaflex padding provide protection and grip - Not compatible with classic Yakima fork-mounted bike carriers; - Sold in sets of 4 Product Specs: - Weight: 3.25 lbs. - Limited Lifetime Warrantyhttps://cdn.shopify.com/s/files/1/0266/3943/3776/products/1_5024962c-0820-4ae8-8909-d5ad194b535e_1024x1024.jpg

Secure your through-axle-equipped bike with RockyMounts' DriveShaft HM. This mount fits 15mm and 20mm through-axle forks, plus it is incredibly easy to load and unload. The bolt-on, do-it-yourself installation is perfect for any application; truck beds, trailers, vans, or even at home in your garage! Plus, it comes with a lock core and two keys for peace of mind.

Shuttle Saver - Our new T2 pad is made to fit any shape of tailgate, and has an adjustable rear camera panel - both RF exclusive, patent pending features. Carry up to 6 bikes with no bike on bike crime with raised bumpers + downtube straps. Backup Plan - Exclusive to the T2 is the adjustable rear panel that allows for easy adaptation to any rear camera + handle position. Shape Shifter - Six adjustment straps along top edge of the installed pad provide a fit tailored to your tailgate’s shape - even curved! Just Say No - To bike on bike crime. The T2 features raised bumpers in the truck box that keep frame downtubes in place and secure, minimizing contact while shuttling. Specs - Construction: PVC tarpaulin with micro-brushed inner lining - Adjustment: Top edge adjustment, camera window adjustment - Other: Raised bike spacers and padding, hook-and-loop frame straps, lock loop Bike Capacity - Mid-Size Truck (Tacoma or similar): 5-bike - Full-Size Truck (Ford F-150, F-350 or similar): 6-bike

1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks. - Not for use on our original NV rack.

The Access Bike Ramp makes it easy to load your bike onto your Kuat NV 2.0 hitch rack.

For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.

The Hi-Lo Pro takes our Hi-Lo to the next level. We have added our proprietary Flat-lock hitch cam that ensures a zero-wobble user experience. We have also included our fully redesigned hitch lock. - Hi-Lo Pro is a 2” hitch extension (works with 2” hitch receivers) with a 250 lb. weight limit - Provides 2" of drop or 2" of rise to the vehicle receiver - Provides 10” of Hitch Extension - Matte Black with black water transfer logos - Patent Pending - No Worries Warranty - Approved for use with the NV 2.0 (including NV 2.0 Add-On), Base 2.0 (including NV Base 2.0 Add-on) Sherpa 2.0, Transfer family, and the original NV 2” 2-bike only

When your solo ride turns into a weekend expedition with friends, the NV 2.0 Add-On lets you increase the NV 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium gloss metallic powder with water transferred logos - Compatible with 2” NV 2.0 - Increases 2” NV 2.0 carrying capacity to 4 bicycles weighing up to 40 - pounds each - Holds wheelbases up to 48” and tires as large as 4.8” - Quick change from 2 to 4 bikes

Expand your vehicle’s carry capacity (and your circle of friends) up to four bikes with the NV 2.0 Add-Ons. It's conceived for road trips, family group rides and expeditions in the backcountry—we took the best platform rack on the market and increased it. Integrated Cable Locks - Seamlessly integrated locks—long enough to fit any frame—make sure your bike stays off Craigslist while you enjoy that post-ride beer stop. And when you’re ready to roll again, they stow right back into the rack. Adjustable Tire Cradles - Bikes not wanting to share space nicely? Easily dial in the fit with adjustable tire scoops. You get three positions to choose from, so handlebar and seat post clearance is never an issue. - Intuitive Front Tire Ratchet - Trail-Doc Compatible - Premium Protective Gloss or Matte Powdercoat

With years of experience and feedback, Kuat overhauled every feature and streamlined the look while maintaining the spirit of its predecessor. A re-designed pivot system with foot assist will endure a lifetime of abuse. Adjustable cradles allow for fast bike fit adjustments. Individual bike cable locks are longer, more durable, and easier to use. Holds bikes with up to 4.8-inch tires ensure a true fit for any bike in your stable. Updated ratchet arm creates an intuitive release and a more stable tow. The ground-up re-design of the Trail Doc work stand delivers a pro level feel. These are only the highlights, resulting from 3 years of extensive development, making the NV 2.0 the most advanced hitch rack on the planet. - Adjustable front tire cradle system - Re-designed pivot with optional foot assist - Fully integrated cable locks - Trail Doc included - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - No-tool install with hand tight hitch cam system - Premium gloss metallic powder with water transferred logos - Hitch lock included - 2 Bike capacity up to 60 lbs. each - Holds wheelbases up to 48-inch, and tires as large as 4.8-inch with use of the Phat Bike Kit - Fits 20-inch to 29-inch tires - Wheel adapter needed for 20-24-inch tires - Available in both 2-inch & 1.25-inch hitch sizes - Dedicated 2-inch model is able to carry up to 4 bikes with optional NV 2.0 Add-On

When your solo ride turns into a weekend expedition with friends, the NV Base 2.0 Add-On lets you increase the NV Base 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium matte powder coat - Compatible with 2-inch NV Base 2.0 - Increases 2-inch NV 2.0 carrying capacity to 4 bicycles weighing up to 40 pounds each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Quick change from 2 to 4 bikes

Expand your vehicle’s carry capacity (and your circle of friends) up to four bikes with the NV 2.0 Add-Ons. It's conceived for road trips, family group rides, and expeditions in the backcountry—we took the best platform rack on the market and increased it. Integrated Cable Locks - Seamlessly integrated locks—long enough to fit any frame—make sure your bike stays off Craigslist while you enjoy that post-ride beer stop. And when you’re ready to roll again, they stow right back into the rack. Adjustable Tire Cradles - Bikes not wanting to share space nicely? Easily dial in the fit with adjustable tire scoops. You get three positions to choose from, so handlebar and seat post clearance is never an issue. - Intuitive Front Tire Ratchet - Trail-Doc Compatible - Premium Matte Black Powdercoat

Kuat's NV 2.0 Base is loaded with features that make it one of the most equipped platform racks on the planet. This darkened brute features Kuat's foot lever pivot release, adjustable cradles for increased bike fit, integrated cable locks, a hand-tight cam system, and a ballistic black powder coat that will stand up to years of abuse. - Adjustable front tire cradle system - Re-designed pivot with optional foot assist - Fully integrated cable locks and hitch lock included - Front tire ratchet with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - No-tool install with hand tight hitch cam system - Premium matte powder coat - 2 Bike capacity up to 60 lbs. each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Available in both 2-inch & 1.25-inch hitch sizes - Dedicated 2-inch model is able to carry up to 4 bikes with optional NV Add-On 2.0 Base

Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.

Piston E-Bike Ramp

Like the first version, the Pivot v2 will make sure your rack never gets in the way. Smoothly swing up to a 4-bike rack to the side for clear access to tailgates, rear doors, and hatchbacks. And when it’s time to load up, the locking mechanism makes sure your rack only moves when you want it to. - Clearance for tailgates or rear doors - Proprietary FLATLOCK cam system - Locking hitch pin - Lifetime Warranty - 2” Hitch Only - Quick-release 90 or 120 degree swing away - Driver-Side or Passenger-Side Swing Options - Compatible with fully loaded 4-bike NV 2.0 - Load up to a maximum of 250lbs

RackDock from Kuat. A sophisticated solution for storing your hitch rack. Easy wall installation and the ability to hold up to 100lbs keeps your hitch rack secure and out of the way in the garage, preventing damage to the rack, cars, and of course—bikes. - Supports up to a 4-bike rack (100 lb max) - All hardware included - 2" hitch and 1.25" hitch adaptor included - Magnetic faceplate