Rims

Zipp's 3ZERO MOTO carbon rims are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension

Zipp's 3ZERO MOTO carbon rims are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension

No.9 36w rims are our choice for all-around trail riding and off-road touring. They fit a huge range of modern mountain bike tires and offer lightweight performance across the board. Available in both 27.5" and 29" sizes, these highly versatile mountain rims provide huge performance gains over aluminum rims of the same width. A perfect mix of width, weight, and stiffness, these will be right at home on almost any mountain bike in your stable. As with all rims we sell, these come with tubeless valves and tape in the box. - Designed to be used with spoke nipple washers - Recommended weight limit 240lbs

No.9 36w rims are our choice for all-around trail riding and off-road touring. They fit a huge range of modern mountain bike tires and offer lightweight performance across the board. Available in both 27.5" and 29" sizes, these highly versatile mountain rims provide huge performance gains over aluminum rims of the same width. A perfect mix of width, weight, and stiffness, these will be right at home on almost any mountain bike in your stable. As with all rims we sell, these come with tubeless valves and tape in the box. - Designed to be used with spoke nipple washers - Recommended weight limit 240lbs

Whisky's No.9 30d road rims are designed to offer leading edge, tubeless performance on or off-road. These rims offer lightweight, stable platforms to build exquisite wheels. Its wide internal width pairs exceedingly well with a broad range of tires and provides versatility no matter what surface you’re riding. These disc brake-specific rims offer clean design and aesthetics. From tarmac to gravel, brevets to the CX course, this rim is Whisky's lightweight go-to for all round, drop bar performance. As with all rims they make, these come with tubeless valves and required tape in the box. - Designed to be used with spoke nipple washers - Rider weight limit: 300lbs

Whisky's No.9 50d rims are designed to a be a lightweight, aero, stable starting point to build exquisite wheels. They offer an aero advantage over the 30d rims, while offering a stiffer, more robust platform. Fit for long days in the saddle, cutting through the wind and hammering finish line sprints, they’re a perfect all-rounder. These disc brake-specific rims offer clean design and aesthetics. Featuring a wide inner width, they pair well with a variety of tires across the full range of drop bar pursuits. As with all rims Whisky makes, these come with tubeless valves and required tape in the box. - Designed to be used with spoke nipple washers - Rider weight limit: 300lbs

Whether it’s 'cross, road, or mountain, nothing makes your bike feel faster than a good set of wheels. The Whisky No.9 carbon rims are performance-driven designs that offer excellent durability and features to create a torsionally stiffer rim, compared to single wall carbon offerings. Available in multiple sizes and widths, Whisky’s rims have you covered no matter what or where you ride. - Designed to be used with spoke nipple washers - Rider weight limit: 300lbs

Whisky's No.9 30w rims are the most versatile performance rims they offer. A 25mm internal width works well with tires from wide and plus road tires to full-on mountain bike tires. Whisky offers this rim in both 650b/27.5” and 700c/29” sizes, so there’s one to fit any bike in your stable. These rims feature hookless beads designed for easy tubeless set up and impact resistance. Light and wide, they offer great performance and versatility. As with all rims Whisky makes, these come with tubeless valves and tape required in the box. - Designed to be used with spoke nipple washers - Rider weight limit: 300lbs

The No.9 Carbon GVL rim’s low rotational weight and the aerodynamic benefits of its 35mm-deep rim profile help you conserve energy over miles of rollers, false flats, and whatever else your gravel rides throw at you. The 23mm internal width pairs well with tires ranging from 32mm to 2.2-inches wide for versatility in unpredictable conditions. The asymmetric rim profile equalizes spoke tension and angles for stronger, stiffer builds, making the No.9 Carbon GVL a solid foundation for wheels that will take your gravel bike to the next level. - Recommended rider weight limit is 240 lbs. - 85 PSI maximum tire pressure on a 32c tire - Weight: 435g - For tires 32mm – 2.2-inches

For 27.5-inch fatbikers looking to upgrade to carbon, the lightweight No.9 76w rim offers all the simplicity of a tubeless setup. Ready to roll over obstacles and give riders a longer contact patch, it’s optimized for use with tires measuring 4–5-inches. We’ve narrowed the spoke bed to reduce weight, and we’ve utilized a large, reinforced rim wall edge to withstand impacts related to running low pressures. Thanks to our convex rim profile designed to roll right through sand and snow, paired with our double-wall construction, all-season riding is within reach.

Our No.9 84w rim looks to split the difference between our 70w and 100w rims, offering an 84mm internal width and a dash of versatility to fatbikers running 4–5-inch tires. We’ve narrowed the spoke bed to cut a little weight, and we’ve utilized a large, reinforced rim wall edge to withstand impacts related to running low pressures. Thanks to our convex rim profile designed to roll right through sand and snow, paired with our double-wall construction, all-season riding is within reach.

The Logic rim uses a wider 35mm profile with a thick sidewall, which makes the rim strong and resilient to sideways impacts that can happen from anything between under-rotating a flair or over-rotating a hard 360 out of a rail. - Very strong reinforced spoke hole design - Extra-thick sidewalls to resist denting under harsh conditions

WTB's proprietary 4D spoke drilling prevents binding and lateral loading of the spokes, while the spoke bed itself has been updated to provide a more compatible interface between the spoke and rim. Integration of the all-new Solid Strip on our TCS 2.0 rims delivers the easiest to mount and most reliable tubeless system we've ever made. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area

WTB's proprietary 4D spoke drilling prevents binding and lateral loading of the spokes, while the spoke bed itself has been updated to provide a more compatible interface between the spoke and rim. Integration of the all-new Solid Strip on our TCS 2.0 rims delivers the easiest to mount and most reliable tubeless system we’ve ever made. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area

Built for bashing, whether on a gravity shred sled or fully loaded bikepacking rig, WTB's KOM Tough rims are extruded from top-tier alloy to provide utmost durability at a reasonable weight. Their legendary I-Beam construction has evolved to further reinforce the rim with dual support beams that provide increased strength and stiffness for the world’s most aggressive riders. KOM Tough rims are proven on the toughest tracks of the Enduro World Series, depended on for daily trail rides, and trusted while bikepacking in remote regions of the world. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area.

Built for bashing, whether on a gravity shred sled or fully loaded bikepacking rig, WTB's KOM Tough rims are extruded from top-tier alloy to provide utmost durability at a reasonable weight. Their legendary I-Beam construction has evolved to further reinforce the rim with dual support beams that provide increased strength and stiffness for the world's most aggressive riders. KOM Tough rims are proven on the toughest tracks of the Enduro World Series, depended on for daily trail rides, and trusted while bikepacking in remote regions of the world. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area.

E-bikes add to the riding experience by simply providing more for less. More distance, more laps, more climbs and more descents. With all those "mores" also comes more weight continually bashing on the components of an e-bike. In order to overcome the increased forces induced by the technological progression of modern e-bikes, we designed our HTZ rims with more material in every area of the rim prole. Every wall of the rim is 25-30% thicker in comparison to those on our standard rims, which we then paired with our proven I-Beam center support to ensure no beating was too great for these rims. All HTZ rims are TCS 2.0 tubeless, feature asymmetrical spoke drilling, and are available in widths ranging from i23 to i35 in order to provide options for e-bikes ranging from e-assist gravel bikes to dual-crown downhill bikes that no longer need a truck to be shuttled. FEATURES: - Capable of withstanding the forces of a modern e-bike. - 4D angled spoke drilling eliminates binding and lateral loading and disperses tension more evenly over a greater area. - Symmetric outer profile provides equal dissipation of impact forces on both sides of the rim while asymmetric spoke hole drilling allows for more even spoke tension and increased wheel strength. - Disc-brake only. - TCS 2.0 Tubeless ready and comes with a preinstalled Solid Strip, which lies beneath the tubeless tape and prevents sagging at the spoke holes, creating a smooth interface between the rim and tire bead. This prevents air from escaping around the bead and therefore requires less air volume and pressure to mount a tire. Solid Strip also protects the airtight tubeless system from being punctured in the case of a broken spoke. TCS 2.0 creates a more robust, easily installed, and dependable tubeless system. USAGE: E-bike

E-bikes add to the riding experience by simply providing more for less. More distance, more laps, more climbs, and more descents. With all those "mores" also comes more weight continually bashing on the components of an e-bike. In order to overcome the increased forces induced by the technological progression of modern e-bikes, we designed our HTZ rims with more material in every area of the rim prole. Every wall of the rim is 25-30% thicker in comparison to those on our standard rims, which we then paired with our proven I-Beam center support to ensure no beating was too great for these rims. All HTZ rims are TCS 2.0 tubeless, feature asymmetrical spoke drilling, and are available in widths ranging from i23 to i35 in order to provide options for e-bikes ranging from e-assist gravel bikes to dual-crown downhill bikes that no longer need a truck to be shuttled. FEATURES: - Capable of withstanding the forces of a modern e-bike. - 4D angled spoke drilling eliminates binding and lateral loading and disperses tension more evenly over a greater area. - Symmetric outer profile provides equal dissipation of impact forces on both sides of the rim while asymmetric spoke hole drilling allows for more even spoke tension and increased wheel strength. - Disc-brake only. - TCS 2.0 Tubeless ready and comes with a preinstalled Solid Strip, which lies beneath the tubeless tape and prevents sagging at the spoke holes, creating a smooth interface between the rim and tire bead. This prevents air from escaping around the bead and therefore requires less air volume and pressure to mount a tire. Solid Strip also protects the airtight tubeless system from being punctured in the case of a broken spoke. TCS 2.0 creates a more robust, easily installed, and dependable tubeless system. USAGE: E-bike

E-bikes add to the riding experience by simply providing more for less. More distance, more laps, more climbs, and more descents. With all those "mores" also comes more weight continually bashing on the components of an e-bike. In order to overcome the increased forces induced by the technological progression of modern e-bikes, we designed our HTZ rims with more material in every area of the rim prole. Every wall of the rim is 25-30% thicker in comparison to those on our standard rims, which we then paired with our proven I-Beam center support to ensure no beating was too great for these rims. All HTZ rims are TCS 2.0 tubeless, feature asymmetrical spoke drilling, and are available in widths ranging from i23 to i35 in order to provide options for e-bikes ranging from e-assist gravel bikes to dual-crown downhill bikes that no longer need a truck to be shuttled. FEATURES: - Capable of withstanding the forces of a modern e-bike. - 4D angled spoke drilling eliminates binding and lateral loading and disperses tension more evenly over a greater area. - Symmetric outer profile provides equal dissipation of impact forces on both sides of the rim while asymmetric spoke hole drilling allows for more even spoke tension and increased wheel strength. - Disc-brake only. - TCS 2.0 Tubeless ready and comes with a preinstalled Solid Strip, which lies beneath the tubeless tape and prevents sagging at the spoke holes, creating a smooth interface between the rim and tire bead. This prevents air from escaping around the bead and therefore requires less air volume and pressure to mount a tire. Solid Strip also protects the airtight tubeless system from being punctured in the case of a broken spoke. TCS 2.0 creates a more robust, easily installed, and dependable tubeless system. USAGE: E-bike

E-bikes add to the riding experience by simply providing more for less. More distance, more laps, more climbs, and more descents. With all those "mores" also comes more weight continually bashing on the components of an e-bike. In order to overcome the increased forces induced by the technological progression of modern e-bikes, we designed our HTZ rims with more material in every area of the rim prole. Every wall of the rim is 25-30% thicker in comparison to those on our standard rims, which we then paired with our proven I-Beam center support to ensure no beating was too great for these rims. All HTZ rims are TCS 2.0 tubeless, feature asymmetrical spoke drilling, and are available in widths ranging from i23 to i35 in order to provide options for e-bikes ranging from e-assist gravel bikes to dual-crown downhill bikes that no longer need a truck to be shuttled. FEATURES: - Capable of withstanding the forces of a modern e-bike. - 4D angled spoke drilling eliminates binding and lateral loading and disperses tension more evenly over a greater area. - Symmetric outer profile provides equal dissipation of impact forces on both sides of the rim while asymmetric spoke hole drilling allows for more even spoke tension and increased wheel strength. - Disc-brake only. - TCS 2.0 Tubeless ready and comes with a preinstalled Solid Strip, which lies beneath the tubeless tape and prevents sagging at the spoke holes, creating a smooth interface between the rim and tire bead. This prevents air from escaping around the bead and therefore requires less air volume and pressure to mount a tire. Solid Strip also protects the airtight tubeless system from being punctured in the case of a broken spoke. TCS 2.0 creates a more robust, easily installed, and dependable tubeless system. USAGE: E-bike

Our flagship CZR carbon rims deliver minimal rotational weight and fine-tuned compliance to make you feel at one with the terrain. Reinforced spoke holes, TCS 2.0 technology, an asymmetrical design, and two years of development make them the most dependable carbon rims on the market. CZR rims set themselves apart from the pack by providing unbeatable strength and ride quality at a more affordable price. Available in i23 and i30 inner widths to satisfy the needs of both gravel and mountain riders. FEATURES: - Reinforced spoke beds, proven 4D angled spoke hole drilling, and an asymmetrical design…all the necessary ingredients of an incredibly durable rim. - Two internal width options… 23mm for the gravel-centric and 30mm for the mountain-focused. - When compared to the competition, lab tests proved our CZR carbon rims to be lighter overall, more impact resistant, and laterally stiffer while remaining vertically compliant. To be precise, our CZR i23 rims were 38% more impact resistant than their direct competition while our CZR i30 rims were 10% more impact resistant. USAGE: Adventure Road / Gravel / Cross-Country / Trail / Enduro

- Tubeless compatible US made aluminum disc-only rim with a 25mm wide aero profile - Specifically tuned to be aerodynamically paired with 23-28c road tires, though a 20mm inner width compliments even the most voluminous gravel and cyclocross tires - Tubeless ready using 24mm Velotape

Product specs: - 36 hole count - Front and rear specific - 28.5mm wide - Welded - 20", 24" - 395g front rim 392g rear rim - Also available in 24", black only

Product specs: - Size:24", 26" - Width:39mm - Bead width: 39mm - Inner bead width: 30mm - Section height: 27.5mm - Weight (26"): 760g - Sleeved or welded - Hole count: 32, 36

Product specs: - Str tubeless ready - Size: 27.5", 29" - Outside width: 40mm - Inner bead width: 36mm - Weight: 27.5"-515g, 29"-550g - Double wall welded rim (sleeved rims available oem only) - Brake compatibility: disc only - Hole count: 28/32

Based on the legendary Flow EX, the new Flow EX3 rim features Tiebeam, an internal reinforcement that offers unmatched impact resistance and the best air retention of any tubeless rim. The Flow EX3 combines the incredibly durable Tiebeam design of Stan's classic Flow EX with the 29mm internal width and 6069 aluminum construction of the popular Flow MK3 to create an entirely new rim built to handle today's faster, heavier, and more capable enduro, downhill and e-bikes. - Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie-beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires

- Asymmetric Bead Socket Technology brings Stan's legendary easy inflation and the most reliable airtight seal to wider, offset carbon rims - Custom carbon layup equalizes impact forces on both the long and short sides of the rim, making both stronger - Asymmetric rim shape with offset drilling improves bracing angle and balances spoke tension to create a stronger overall wheel - 250lb Recommended Maximum Rider Weight - 27.5": 420g, 29": 455g

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6'' tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asymmetrical design, builds into an incredibly durable wheel that brings added confidence to every ride. Specs: - Rim Material: Aluminum - Rim Eyelets: No - Valve: Presta - Rim Construction: Double wall - Brake Type: Disc - Tire Type: Tubeless Ready

Spank's Spoon 32 rims are gravity rims done right! If your rides encompass big hits and fast descents then a pair of Spoon 32 rims might be just what you need to tackle your favored terrain. - Six Series aluminum alloy - Disc specific rim - Tubeless Ready

- A high performance alloy rim designed for freeride, race and downhill use - Tubeless ready with anti-burp rim hooks to prevent the loss of pressure and keep tires firmly in place - 32 holes with an inner width of 28mm and outer width of 33mm to optimize tire spread and enhance traction - The corrugated rim center, a brand acclaimed technology, adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material - Shotpeen finish to increase fatigue life and make it more durable

Upgrade hoops for your kid's 24” MTB. The SPOON 28-24 is a durable six series alloy rim model featuring SPANK’s patented OohBah profile design. A 23mm internal width accepts a wide range of 24” tires from street to DH. Whether you’re looking to spruce up your street bike, or out to upgrade your kid’s MTB, SPOON 28-24 rims are an ultra-strong, ultra-safe option at a value oriented price. Key Technologies: OohBah Tubeless: Not recommended ERD (mm++): 474 ETRTO (mm): 507x23 Discipline: Kids

- An ultra-wide, high performance alloy rim, weight optimized for Enduro, Trail and All Mountain use - Tubeless ready with anti-burp rim hooks to prevent the loss of pressure and keep tires firmly in place - 32 holes with an inner width of 35mm and outer width of 39.5mm provides ultra-wide support for Plus-Size and high volume tires - The corrugated rim center, a brand acclaimed technology, adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material - Shotpeen finish to increase fatigue life and make it more durable - MGR Dynamal Alloy

Wheels are the first point of contact between you and your bike, and the trail you’re riding on. And while wheel sizes and standards continue to develop significantly year on year, often to both the rider and the industry’s dismay, very little innovation has been seen in the compliancy and responsiveness of the wheel as this first, most important contact and conductor. What Spank has seen in recent years is that bike suspension is continuously evolving and adapting to compensate for stiffer frames and more rigid, deeper profile carbon fiber rims. This overall stiffer rig is being softened, or counter-acted by both bike suspension, and tire design — not to mention the ever lower and lower tire pressures riders are running. Rider position (wider, lower, more forward) is also being impacted directly by the bike frame and cockpit geometries which is constantly aiming for a better riding feel. So surely it is overdue time to re-examine how the engineering of the wheel can become an active contributor to the efficiency of the overall set up. Spank Industries has done just this. - Low sectional profile height and wide width, adds radial compliance, while keeping high lateral stiffness. - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles. - Ideal for Trail/AM/Enduro bikes looking for a wide profile, without the weight penalty

Wheels are the first point of contact between you and your bike, and the trail you’re riding on. And while wheel sizes and standards continue to develop significantly year on year, often to both the rider and the industry’s dismay, very little innovation has been seen in the compliancy and responsiveness of the wheel as this first, most important contact and conductor. What Spank has seen in recent years is that bike suspension is continuously evolving and adapting to compensate for stiffer frames and more rigid, deeper profile carbon fiber rims. This overall stiffer rig is being softened, or counter-acted by both bike suspension, and tire design — not to mention the ever lower and lower tire pressures riders are running. Rider position (wider, lower, more forward) is also being impacted directly by the bike frame and cockpit geometries which is constantly aiming for a better riding feel. So surely it is overdue time to re-examine how the engineering of the wheel can become an active contributor to the efficiency of the overall set up. Spank Industries has done just this. - Low sectional profile height and wide width, adds radial compliance, while keeping high lateral stiffness. - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles. - Ideal for Trail/AM/Enduro bikes looking for a wide profile, without the weight penalty

The SPANK Flare 24 OC Vibrocore Rim is a disc-specific, tubeless-ready clincher rim optimized for Gravel, Adventure, and MTB Cross Country use. The Vibrocore inner well reduces the transmission of harmful vibration frequencies enhancing comfort on those long days on the bike. The OC edition of the SPANK Flare 24 features an asymmetric profile to improve spoke tension balance between drive and non-drive side spokes. - Disc-specific, tubeless-ready clincher rim, with Vibrocore, optimized for Gravel, Adventure, and MTB Cross Country use - Vibrocore inner well reduces the transmission of harmful vibration frequencies, improving rider comfort and increasing the fatigue life of the rim - Low-profile 16.5mm depth and wide 27.5mm outer width enhance Radial Compliance, improving traction while reducing negative feedback to the rider - Asymmetric, 24mm inner width profile improves spoke tension balance between drive-side and non-drive-side spokes and optimizes gravel/XC tire spread - Bead Nip tubeless bead seats provide reliable tubeless performance even at low pressures

The SPANK Flare 24 Vibrocore Rim is a disc-specific, tubeless-ready clincher rim, optimized for Gravel, Adventure, and MTB Cross Country use. SPANK's radial-compliant, disc-specific rim utilizes a proprietary Vibrocore inner well that reduces the transmission of harmful vibration frequencies, resulting in improved rider comfort as well as increasing the fatigue life of the rim. Paired with our Vibrocore handlebars, whether you're on risers or drops, long rides are about to get more comfortable. - Disc-specific, tubeless-ready clincher rim, with Vibrocore, optimized for Gravel, Adventure, and MTB Cross Country use - Vibrocore inner well reduces the transmission of harmful vibration frequencies, improving rider comfort and increasing the fatigue life of the rim - Low-profile 16.5mm depth and wide 27.5mm outer width enhances Radial Compliance, improving traction while reducing negative feedback to the rider - Symmetric profile with wide 24mm inner width, optimizes tire spread with modern wide gravel tires, without compromising overall weight - Bead Nip tubeless bead seats provide reliable tubeless performance even at low pressures

- Unique profile with low sectional profile height and wide width, which adds radial compliance, while keeping high lateral stiffness. - Improved radial compliance for better traction over bumps and chatter, while reducing negative feedback to the rider. Performance and comfort enhanced. - Vibrocore inner well reduces the transmission of harmful vibration frequencies, meaning less vibration for the suspension and rider, also increasing the fatigue life of the rim. - 30mm internal width is extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use without negative squaring off of tire profiles. - Ideal for DH and Freeride. - Tubeless Ready - Technologies: BeadBite Anti-burp, OohBah Inverted Inner Wall

- The next generation in SPANK’s mountain bike rims with a built in vibration damping system. - Low sectional profile height and high width adds radial compliance while keeping high lateral stiffness and torsional strength. Features - Radially Compliant Gravity Rim with Vibrocore - Oohbah Inverted Inner Wall, BeadBite anti-burp - Optimized for DH, FR, and Heavy Enduro - Tubeless Ready

Race Face's popular AR rims have been updated for 2019 with an asymmetric rim profile, improving spoke tension balance and overall wheel build quality and durability. The rim extrusion has also been improved to increase impact performance for more aggressive applications. With a tubeless compatible rim profile and color match capabilities, these rims are ready for any build you can throw at them. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Tubeless ready with strong tire retention bead

The ARC Offset rims utilize an asymmetrical design to optimize spoke tension balance, wheel durability, and wheel stiffness. Its 6069 Alloy construction provides a superior strength-to-weight ratio, significantly improving toughness. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Strong tire retention bead - Tubeless ready

The ARC Offset rims utilize an asymmetrical design to optimize spoke tension balance, wheel durability, and wheel stiffness. Its 6069 Alloy construction provides a superior strength-to-weight ratio, significantly improving toughness. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Strong tire retention bead - Tubeless ready

Stiffer, stronger, and ready to party, ARC 31 Carbon Rims take notes from Race Face's Next R carbon wheelset; built to handle the most challenging days on the trail. With one of the lightest enduro rims on the market, you can tackle the climbs with speed while you hit the descents with confidence. The ARC 31 have been redesigned to take full advantage of the benefits carbon fiber has to offer. Featuring a generous 31mm internal width for modern tire widths with lower pressures, and available in 28 and 32 spoke holes with incredible stiffness all wrapped up in a mere 445g (27.5). Lace these rims to your favorite hub and you’ve got a world class wheelset ready for action.

Stiffer, stronger, and ready to party, ARC 31 Carbon Rims take notes from Race Face's Next R carbon wheelset; built to handle the most challenging days on the trail. With one of the lightest enduro rims on the market, you can tackle the climbs with speed while you hit the descents with confidence. The ARC 31 has been redesigned to take full advantage of the benefits carbon fiber has to offer, and feature a generous 31mm internal width for modern tire widths with lower pressures. Lace these rims to your favorite hub, and you’ve got a world-class wheelset ready for action.

A long running standard, the Hazard Lite is revered because of its strength, lightweight and affordable price. Constantly imitated but never matched in quality or reliability, the Hazard Lite is used regularly by pro-level riders–even the ones that are being paid to ride something else. SPECS - 6000 series aluminum - 32mm wide - 17mm tall 36H - 20-inch version (ERD: 390mm) - 24? version (ERD: 486mm)

HED Belgium G alloy rims make any custom wheel build that much sweeter. With 30mm external and 25mm internal widths, you can add tire volume, smoothness, and rolling speed to any bike or hub set. All Belgium rims feature a welded rim joint, and are drilled for a standard presta valve. Spoke drilling is down the centerline of the rim (not offset). Please carefully read the specifications below to find out detailed information on the different rims we offer. 700c - Tire Type: Clincher (tubeless compatible) - Rim Width (External): 30mm - Rim Depth: 24mm - Hole Counts: 24, 28, 32 - Color: Black - Brake Track: N/A - Wheel Size: 700c - Weight: 453 grams - Max Pressure: 80psi - ERD: 592mm 650B - Tire Type: Clincher (tubeless compatible) - Rim Width (External): 30mm - Rim Depth: 24mm - Hole Counts: 28 and 32 - Color: Black - Brake Track: N/A - Wheel Size: 650b - Weight: 426 grams - Max Pressure: 80psi - ERD: 555mm

HED's entire line of Big Deal fat rims can be purchased as a rim-only for the custom build of your dreams! Big Deal is 445 grams and 85mm-wide of pure fat-bike joy. This one-piece, full-carbon rim will change the way you ride. Big Deal utilizes a ribbed, single-wall design to maximize stiffness and minimize rotational weight…all on a tubeless-ready platform. Compared to most aluminum fat bike wheel/tire combinations in the market today, you can expect to lose 1.5 to 2 pounds… per wheel. Note that the Big Deal is drilled symmetrically ONLY and cannot accommodate offset frames. Big Deal utilizes Inflatobam, HED's patented tubeless technology for installing big tires. The twin channel rim design provides a better pre-inflation seal by trapping each tire bead against the rim. This drastically reduces the amount of air it takes to get the beads to “bam” into place. In conjunction with the rim shape, Inflatobam utilizes Inflatobands. These effectively provide a variable rim-channel diameter. This compensates for the discrepancies in tire bead diameters by minimizing the gap between the tire and the rim channels (the main source of air leaks). Once seated, the angled bead shelf prevents the tire from collapsing back into the rim at low pressure. Our interior surfacing and tight tolerances ensure no tire burp or slip. Also note that our rim shape does not require tire levers to remove and install tires. Inner tubes may be used, too. Additional Info - Rim Type: 85mm - Rim Material: Carbon - Rim Weight: 445g - Color: Twill Weave - Rim Hole Count: 32 - Drill Pattern: Symmetrical Only - Decal Type: White - MIN/MAX TIRE SIZE: 3.8 - 5.0" - Rim ERD: 564 (includes washer)

HED's entire line of Big Deal fat rims can be purchased as a rim-only for the custom build of your dreams! Thus far, our Big Deal fat rims and wheels have won the hearts of cyclists around the world. What if that's not enough for you? What if we told you that we now have an even BIGGER deal than before? Enter: The Big Half Deal (B.H.D.). This is a special, larger diameter version of our beloved 85mm-wide carbon Big Deal rim. With a 27.5-inch size, it's smack-dab-HALF-way between a 26" wheel and a 29" wheel. If you have a new-fangled 27.5" fat bike, this is THE performance rim choice. Like other Big Deals, the B.H.D. is tubeless ready with our patented Inflatobam technology. Tech Notes 1. Do NOT use tire levers on B.H.D. rims! 2. Specific to our Big Deal line of carbon rims: If you choose to ride these rims on regular dirt trails (e.g. NOT in soft snow or sand), wider tires and higher air pressure will decrease the chance of rim damage from striking an obstacle. We strongly recommend an honest assessment of your ride style. For the BHD, use 8psi minimum on groomed snow, or 10psi minimum on dirt and rocks - both with a minimum tire size of 3.8". Additional Info - Rim Width: 85mm - Rim Material: Carbon - Rim Weight: 465 grams - Color: Twill Weave - Rim Hole Count: 32 - Drill Pattern: Symmetrical Only - Decal Type: White - MIN/MAX TIRE SIZE: 3.8 - 5.0" - Rim ERD: 589 (includes washer)

- Braking surface: Disc - Rim weight: 445g - Finish: Black Anodize/Vinyl Decals - Type: Tubeless-ready clincher - Rim material: EA90 aluminum/welded - Rim depth: 27mm - Internal rim width: 19.5mm - External rim width: 24mm - Spoke holes: 28; 32 - ERD: 580 - Max tension: 1200 N/122 KGF

- Designed for all-around Trail/Enduro use - Ideal for 2.3-2.6" tires and bikes from 110mm to 180mm travel. - Depth –20mm - Inner Rim Width –30mm - Asymmetric External Molded Spoke Holes - 3mm Offset for more balanced spoke tension - Wide Hookless Bead Anti Pinch-Flat Technology - No inserts required or recommended - Rim Construction: Double wall - Brake Type: Disc - Tire Type: Tubeless Ready

This wide rim tackles bumpy sections and holds up to hard hits. Enjoy the long rides! The sleeved aluminum gravel rim is the ideal choice for riding over gravel, roots, or small obstacles on unpaved paths. The robust, all-round rim, with its inner width of 24mm and its wide knobby tires up to 53mm, is suitable for various purposes and provides great comfort.

This wide rim tackles bumpy sections and holds up to hard hits. Enjoy the long rides! The sleeved aluminum gravel rim is the ideal choice for riding over gravel, roots, or small obstacles on unpaved paths. The robust, all-round rim, with its inner width of 24mm and its wide knobby tires up to 53mm, is suitable for various purposes and provides great comfort.

The reliable rim with an ideal price-to-performance ratio! The jack-of-all-trades of road rims: light, wide, and with an ideal price-to-performance ratio. The R 460 works perfectly with wide tires and will deliver many unforgettable rides on the road thanks to its reliability.

The reliable rim with an ideal price-to-performance ratio! The jack-of-all-trades of road rims: light, wide, and with an ideal price-to-performance ratio. The R 470 works perfectly with wide tires and will deliver many unforgettable rides on the road thanks to its reliability.

This rim is your robust and reliable companion for all rides. The R 500 supports your riding, day-in and day-out, over thousands of kilometers, all at an unbeatable price-performance ratio.

Sleeved 25 mm Enduro rim, ready for the rough. Let your muscles play on the uphills and switch to attack mode for the downhills. This is exactly what DT Swiss Enduro rims are made for. Each rim is a piece of high precision engineering and, thanks to the extremely resistant alloy, the E 512 can cope with the most demanding trails.

Sleeved 25mm Enduro rim, ready for the rough. Let your muscles play on the uphills and switch to attack mode for the downhills. This is exactly what DT Swiss Enduro rims are made for. Each rim is a piece of high precision engineering and, thanks to the extremely resistant alloy, the E 512 can cope with the most demanding trails.

This sleeved, 25mm-wide, light, and strong rim is as versatile as AM riding itself. Derived from our extremely successful Enduro rims, which have won at the world's highest level under the world's fastest racers, the M 462 packs that world-class technology into a slightly slimmed package for All Mountain use while staying affordable thanks to the sleeved rim joint.

This sleeved, 25mm-wide, light and strong rim is as versatile as AM riding itself. Derived from our extremely successful Enduro rims, which have won at the world's highest level under the world's fastest racers, the M 462 packs that world-class technology into a slightly slimmed package for All Mountain use while staying affordable thanks to the sleeved rim joint.

Sleeved 30mm Enduro rim, ready to eat rocks. Bringing wide profiles to the most demanding enduro riders, both price- and performance-wise. A sibling of our EWS-winning welded rims, the E 532 packs the materials and technology the world's fastest racers use and puts it into an affordable rim for everyday chargers.