Packs/Racks/Baskets

A full-featured, waterproof urban-inspired pannier that overcomes limitations normally found with waterproof bags. Offers exceptional external load flexibility, removeable internal organizers for digital devices, and a convenient external access pocket for keys and/or phone. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - HYDRACORE liner provides an exceptional IPX5 waterproof rating. - Rixen & Kaul VARIO 2 spring-loaded hooks immediately adjust from 6mm-16mm, without any need for tools. - Rixen & Kaul lower SLIDE-LOCK and FLIP-LOCK hold panniers firmly in place. - Intuitive waterproof roll-down closure system. - Waterproof outer pocket. - Removeable 14.2"x10.2" padded laptop/electronics sleeve/organizer. - Removeable 10"x8" padded tablet/electronics sleeve/organizer. - External zippered pocket for keys/wallet, etc... - Keychain clips + 2 x Axiom keychains. - Independent main compartment and outer compartment compression/cargo straps provide exceptional load control. - Outer straps allow gear to be carried outside of the main cavity. Ideal for unplanned loads faced by commuters. - Strap control loops to protect against strap damage if straps are not secured. - Dual daisy-chain tie-down strips for additional load attachment. - Ultra-visible three-way 3M triangle logos. - Ultra-stiff polypropylene backing plate. - Front and rear light clips. - Carry handle. - D-Rings built in to hook attachment points for additional luggage tie-down, or for attaching your own shoulder strap.

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Side-Load Dry Bag, which maintains a fixed height for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. - Kit includes Anything Cradle, Side-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps - EXP Series Anything Cradle Side-Load Dry Bag is fixed-height for easy loading - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Works with or without EXP Series Anything Cradle Front Pouch - Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation - Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Top-Load Dry Bag, which maintains a fixed width for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. - Kit includes Anything Cradle, Top-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps - EXP Series Anything Cradle Top-Load Dry Bag is fixed-width for easy loading - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Works with or without EXP Series Anything Cradle Front Pouch - Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation - Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

Made of durable polyester fabric and long known as an ideal pannier for extended tours in any kind of weather, the spacious Bike Packer Classic is now available with the QL2.1 rack mounting system. The advantage of this faithful companion at your rear wheel: greater transport comfort, stability and safety. - Panniers (pair) with classic lid closure for large packing volume - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside

Dubbed 'Straggle-Check' frame bags, these bags are designed to fit both 700c and 650b Straggler and 700c Cross Check frames. Size up one size on your bag if you've got a 650b Straggler frame and voila, it fits. These are handmade by Revelate Designs in the U.S., made of Dimension Polyant VX 21 polyurethane coated fabric. It's durable, rip resistant, tightly woven and laminated to make it highly water resistant but not fully waterproof…. Revelate advises using stuff sacks inside (such as the one in which our bags are packaged) if you risk riding in extended downpours or underwater. Surly's Straggle-Check frame bags (as well as their mountain bags) are now using a ladder strap system, which allows greater flexibility in how you attach the bag to your frame. The ladder straps let you customize the fit and placement of the mounting straps so if you have some weird contraption clamped to your frame tubes like a chain keeper, cable pulley, or some trinket grandma gave you, it won't interfere with the mounting straps on the frame bag. They're also including foam bumpers for the mounting straps to minimize thread abrasion to the bag and attachment points Quality YKK brand water resistant zippers – with an improved, water resistant zipper 'garage' – control compartment access and help keep the weather out. Zippers are sewn with a stretch panel to relieve stress on the zipper as well. Stress even kills zippers. The large main compartment has a flexible divider inside, and there's a hydration port to make sure your whistle stays wet. There's also a compartment suitable for smaller items you'll access relatively often, like your map, phone, hard boiled eggs, uncontained pudding, marbles for playing marbles, your dugout, that ring you found that makes you disappear when you put it on, or whathaveyou. Frame bags such as this are light and reasonably voluminous. They are stable because they center weight low between your wheels and body, and they go places where racks and panniers are often troublesome, like singletrack. Note: due to the rough texture of the mounting straps, prolonged use may lead to scratched or worn paint. If you're worried about keeping everything looking pristine you probably ought to look for some other type of bag, or figure a way to protect the paint, such as duct tape, or tatting a top tube doily - for example.

Durable polyester fabric make this pannier a long lasting touring companion. The waterproof roll closure ensures safe and waterproof storage of food and equipment. With its QL2.1 fixing it is quickly mounted and taken off the bike rack. A shoulder strap provides carrying comfort when taken off the rack. - Classical rear pannier (pair) with roll closure - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picknick) - Can be combined with the ORTLIEB Rack-Pack size S or M - Highly reflective Scotchlite reflector - Easy to clean inside - Optional accessories: ORTLIEB carrying system, outer pockets (size S), mesh pocket, bottle cage, 20 mm QL2.1 hook, anti-theft device long - Note: In order to meet standard IP64 (6=dustproof, 4=protected against splash water coming from all directions) the closure must be rolled 3-4 times.

Ideal for multiday tours and self-supported races, the ORTLIEB Gravel-Pack duo offers you a combined payload of 25 liters for additional gear such as mess kits, food, and other "luxury" items. Mounting the Pack to your lowrider bike rack allows you to maintain a low center of gravity and undiminished off-road agility despite your extra gear. While the Pack's streamlined design – without inside pockets and a shoulder-strap pad – helps to keep it in the featherweight class, its lightweight, wear-resistant material withstands even the harshest of rock and gravel conditions you encounter on your way. And, no matter how wet the weather, your things will stay dry thanks to the proven ORTLIEB-waterproof quality and roll closure. With the QL2.1 system and two mounting hooks, the Gravel-Pack remains tightly attached to your bike rack while you ride over hill and dale on your gravel grinder, mountain bike or fatbike.

Surly mountain frame bags are designed specifically to fit in the main triangle of your Surly frame. Their mountain bags are now using a ladder strap system, which allows greater flexibility in how you attach the bag to your frame. The ladder straps let you customize the fit and placement of the mounting straps so if you have some weird contraption clamped to your frame tubes like a chain keeper, cable pulley or some trinket grandma gave you, you know it won't interfere with the mounting straps on the frame bag. Handmade by Revelate Designs in the U.S., these things are made of Dimension Polyant VX 42, a synthetic sailcloth. This stuff is durable, rip resistant, and tightly woven and laminated to make it highly water resistant (but not fully waterproof… Revelate advises using drybags inside if you risk riding in extended downpours or underwater). Compartment access is controlled by quality YKK brand water resistant zippers. The large main compartment has a flexible divider inside, and there's a hidden pocket too. There's also a compartment suitable for smaller items you''ll access relatively often, like your map, phone, hard boiled eggs, uncontained pudding, marbles for playing marbles, your dugout, that ring you found that makes you disappear when you put it on, or whathaveyou. Frame bags such as this are becoming more and more popular. They're light, reasonably voluminous, stable because they center weight low between your wheels and body, and they go places where racks and panniers are often troublesome, like singletrack. Surly offers them in ten sizes for many of their off-road frames. Buy the bag that matches the size of your frame based on the handy sizing chart. Note: due to the rough texture of the mounting straps, prolonged use may lead to scratched or worn paint. Those worried about keeping their frame looking pristine should immediately look for some other type of bag, or figure a way to protect their paint, such as duct tape. Or tatting a top tube doily. For example.

Ortlieb's far traveled classic model made of robust polyester fabric is designed for lowriders in the front or for the rear rack and is also suitable for children's bikes. With its QL2.1 system, it is quickly mounted and taken off the bike rack. - Classical pannier (pair) with roll closure - Can be used individually or as pairs for the rear or lowrider - Sides of PS490 nylon material, front and back of PD620 - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10, and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Symmetrical shape allows use on right or left side - Can be combined on the rack with Ortlieb Rack-Pack size 24L or 31L - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective Scotchlite reflector - Ideal for use on children's/youth bicycles - Easy to clean inside

The Bontrager Travel Backpack makes getting your gear from A to B a breeze. It's built with durable materials that stand up to the rigors of daily travel, an internal strap system for security, and loads of pockets for easy access and on-the-go organization. - Durable materials with bifold design allow quick and easy access to bag contents - Zippered expansion adds additional 2.5" (6cm) of depth for additional capacity - Fleece-lined pocket fits up to 17" laptops and allows easy access from top - Quick-access front pocket is perfect for reading material - Zippered mesh divider provides independent top-and-bottom storage - Internal strap system keeps your gear secured throughout travels - Adjustable sternum strap with magnetic closure for a secure fit - Carry-on compliant with most airlines

We set out to create the most stable, low profile mounted, feature loaded, waterproof seat bag available. The Spinelock seat bag checks all the boxes. The Spinelock integrates user tested and approved features like a one-way air purge valve, rear light slots, loop and bungee deck, and an external plastic bottom with a new patented attachment system. Stability was the driving element in the design process. If you want something you can pack and forget, the Spinelock is your seat bag. There are two size options, neither of which sacrifice features for capacity. The smaller but largely versatile Spinelock 10L maximizes your carry with minimal tire clearance and provides a generous amount of waterproof storage with additional space on the external corded deck. . If you are going on a long expedition or carrying cold weather gear we recommend checking out the Spinelock 16L. How it works: - The Spinelock stability system consists of three components: the saddle clamp, seat bag mounted "Spine" baseplate, and pin. - A low profile, high strength, forged aluminum clamp works in combination with precision IGUS bushings to form the pin interface. Twin forged upper arms, fastened by Torx-25 bolts, rotate into position above the saddle rails for easy mounting. - Resembling a spine ramp familiar to skateboarders, the "Spine" baseplate is made of an impact resistant UV-stabilized nylon and is integrated to the seat bag surface. The plate features two mounting positions to accommodate seatpost setback and saddle adjustments. To connect the bag, you simply line up your selected mounting position to the seat mounted clamp and slide the pin through the aligned holes. Attaching the side compression straps to the wings of the clamp fixes the pin in place and you're ready to ride!

A brilliant idea for all-season, all-weather riders: the bike bags in the Ortlieb High Visibility Line make it easier for other people to see you while you're out there on the streets. This is because all High Visibility bags not only come with reflectors, but are themselves one big reflector. The waterproof bags are made with a polyurethane-coated Cordura fabric that is woven through with a high-luminosity reflective yarn in neon yellow and black. That gives Ortlieb High Visibility bags an added safety feature in twilight conditions and in the dark of night. The Back-Roller High Visibility is the ideal bike bag for those who prefer the convenience of the roll closure system. The durable, waterproof, dustproof, abrasion-resistant and high quality fabric ensures optimal protection for your gear. Equipped with the sophisticated QL2.1 system with self-closing hooks, the Back-Roller attaches to your bike in a flash. And simply use the easily detachable shoulder strap to carry your bike bag comfortably once you've arrived at your destination. - Classical rear pannier (single bag) with roll closure in bright reflective color - QL2.1 mounting system for racks with max. 16 mm tube diameter - Reduction inserts for tube diameters 8, 10 or 12 mm with anti-scratch function preventing abrasion on the rack - 20 mm hook available as separate accessory (e.g. for E-bikes) - PVC-free reflective fabric - Increased visibility when hit by headlights due to highly visible reflective fabric in neon yellow and black - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picnic) - As a pair can be combined with the Ortlieb Rack-Pack size 24L or 31L on the rack - Comfortable to carry with shoulder strap (can be taken off) - Highly reflective 3M Scotchlite reflector - Can be easily cleaned inside

The Expedition Saddle Pack is lightweight, waterproof, and provides a spacious compartment under the saddle, eliminating the need for a rear rack. It’s designed to hold clothes and equipment on long distance rides. Built from a lightweight laminate developed specifically for Apidura, the Pack is highly resistant to abrasions and tears. The seams have been welded together, creating a waterproof seal that ensures contents always stay dry, even in sustained rain. A three-point attachment system with Hypalon-reinforced Velcro straps allows the Pack to hug the seat post, increasing stability and cutting down on lateral movement. Additional Hypalon on the Pack’s body keeps frames in good condition. The roll-down compression and closure system means the Pack’s volume can be tailored precisely to fit a range of packing needs. Materials The Expedition Saddle Pack is cut from a three-layer laminate fabric that was developed specifically for us. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures complete waterproofing. The Pack’s attachment points are reinforced with Hypalon, a rubberized nylon used to provide extra protection against friction and abrasion. For the straps, Woojin buckles have been chosen for their strength and reliability. Finally, a lightweight moulded section of HDPE thermoplastic sits in the Pack’s lower section to reinforce its structure.

E-Mate has been designed by ORTLIEB especially for E-Bikes: a waterproof rear pannier with the proven QL2.1 mounting system. With 16 liters volume it takes anything for a comfortable day trip or a city tour by E-bike, offering room for a spare battery and the E-Bike display. The bright colored interior allows easy packing; the main feature: a padded and removable sleeve holds a battery (compatible with Bosch, Shimano, Yamaha, Bionix). The E-Bike display can be nicely stowed inside a zippered lid pocket. An outer mesh pocket helps keep things organized and allows quick access to the contents. The new magnetic closure allows quick access to the bag. Thanks to interior stiffeners the bag is stable and will stand alone, helpful when packing. The padded shoulder strap ensures comfortable transport of the pannier. Grey reflectors ensure safety from dusk to dawn. E-Mate is sustainably produced in Germany and made of PVC-free nylon fabric. The ORTLIEB QL2.1 system allows fast and easy single-handed mounting and removal of the panniers to almost any carrier. The system is adjustable without requiring any tool, and is suitable for racks with a tube diameters up to 16mm (hook inserts for diameters of 8, 10 and 12mm are included) The hook rail on the lower rear side of the pannier serves for additional fixation; it is made of a two-component synthetic combination with anti-scratch function. This reduces abrasions on the carrier and prevents damage to the rack tubing. Thanks to the QL2.1 mounting hook rotatable in 45° steps the system is compatible with almost any bike rack. A 20 mm hook is available as optional accessory (article code E193) for carriers with larger diameter. OPTIONAL ACCESSORIES - QL-anti theft device (long), 20 mm Quick-Lock2.1 hook, bottle cage, outer pocket (each sold separately)

Bikepacking is also about embracing minimalism. You head off on your bike into the great outdoors, away from it all for an extended period. The amount of gear you can take is limited! The ORTLIEB Frame-Pack allows you to exploit your bike frame to create valuable stowage. Thanks to its lower center of gravity below your top tube, the Frame-Pack makes for an ideal stowage location for heavy gear such as tools, camping stoves, and food supplies. The proven, waterproof nylon fabric and the waterproof zipper ensure that your things remain absolutely dry even in the most inclement weather. Mounting the Frame-Pack with the ultra-strong Velcro straps to the top tube, seat tube, and down tube is a snap. The Frame-Pack is available in a 4-liter size and a 6-liter size – depending on the size of your bike frame.

The ORTLIEB Toptube Frame-Pack is the smart solution for all who want to use their frame's main triangle for storage space without having to do without their water bottle. The solution also works for those who have full-suspension mountain bikes with limited triangle space. With its 4-liter payload, the Toptube Frame-Pack provides plenty of space for heavy equipment such as tent poles, tools, and food supplies, while also helping to secure a low center for improved rising performance. And given that the bag and its zipper are waterproof, you can even cross rivers on your bikepacking tour without worrying about your stuff getting wet. The Frame-Pack attaches easily to your top tube and seat tube with the help of sturdy and highly adhesive Velcro straps. FURTHER FEATURES: - Ideal for all bikes with limited triangle space - Reflecting logo ADVICE: Suitable for carbon fiber frame.

The waterproof ORTLIEB Handlebar-Pack is an indispensable item when you’re on a bikepacking tour in the great outdoors. This Handlebar-Pack offers a payload of either 15 liters for your sleeping bag and pad. It also helps to secure a balanced distribution of gear and weight across your bike. Thanks to the roll closures at both ends, you can always gain quick access to your gear. Compression belts on the outside enable the stowing and attachment of additional equipment. Moreover, the Handlebar-Pack comes with four hooks to enable the attachment of an ORTLIEB Accessory-Pack for additional storage space. Consisting of spacers and two strong Velcro straps, the mounting system ensures secure attachment to any handlebar type, including carbon handlebars. The pack’s stiffened interior and head-tube attachment offer additional stability – in any terrain. FURTHER FEATURES: - Hooks for attaching an ORTLIEB Accessory-Pack - Also suitable for carbon handlebars - Mounting straps with convenient Velcro closures - Lightweight design - High luminosity 3M Scotchlite reflectors

Get ready for your next bikepacking adventure! As a key item in your bikepacking setup, the ORTLIEB Seat-Pack comes with Velcro straps to enable convenient and secure mounting to your seat stem. Projecting backwards from the seat stem, your Seat-Pack also serves as a rear fender. The spacious, waterproof Seat-Pack keeps its contents (e.g. an extra set of clothes) safe and dry. Depending on how long you plan to be away and your Seat-Pack model, you can conveniently adjust the volume of your pack from 7 to 11 liters by adjusting the roll closures on the sides. An additional valve allows you to quickly and easily compress your soft gear for a more compact fit. Your Seat-Pack also serves as a replacement backpack when you're out on a day trip, no matter whether you ride a hybrid bike, a mountain bike, a road bike, or an electric mountain bike. The Seat-Pack is available in two sizes. This model needs only six centimeters of space on your seat stem. That's why the more compact model is ideal for smaller frame sizes, full-suspension bikes, and adjustable seat stems. FURTHER FEATURES: - Reinforced fabric at all points of contact to the seat - Vertical daisy chain for rear light - Also suitable for carbon seat stems - Lightweight design - Four 3M Scotchlite reflectors available for full extension

Everyday utility The MIK Utility Trunk Bag with Panniers offers simple and secure on-bike storage that's easy to install and remove without the need for tools. It has multiple pockets to keep you organized, built-in panniers for extra carrying capabilities, a durable design with reflective materials,Everyday utility and built-in rain cover to keep you and your gear safe and secure in all conditions. Product details - MIK mounting system provides secure, integrated mounting with compatible racks - Front and rear black reflective materials enhance visibility with a stylish finish - Integrated panniers offer expandable storage and easily stow in pockets when not in use - Stay organized with internal mesh pocket and two side pockets, each with a smaller internal pocket - Zippered pocket with soft lining provides secure phone storage accessible from top of bag - Be ready for weather with an integrated rain bag securely stowed in rear pocket - Light loop for easy rear light mounting - Adjustable carrying strap for convenient off-bike use Specifications - Cargo capacity: 2200 cu in (36.1L) - Bag type: Trunk bags - Dimensions: 35cm (l) x 20cm (w) x 20cm (h) - Attachment: Interchange - Material: Woven

• Paddle cradles w/15mm straps keep your board safe and secure, easily removed when not needed • Shortboard rack features strong extruded aluminum clamp with durable anodized finish • Fist most bikes with seat post diameters of 25-32mm diameter and carries most surfboards up to 8' in length • Longboard rack with adjustable-length arms fit most 26" wheel bikes, lightweight alloy construction, 25kg/55lb capacity • Longboard rack fits most surfboards up to 10' in length (not designed for stand-up paddleboards) • Rust-resistant hardware

The Racing Saddle Pack is the first rear pack dedicated to ultra-distance competition and audax. Featuring a sleek design with a compact capacity, the Pack is ideal for storing light, compressible items over vast distances. Constructed from an ultralight, waterproof laminate developed for Apidura. The Pack weighs less than 210g and securely fastens with a sturdy three-point attachment system. It’s designed to fit ergonomically under the saddle, minimizing sway and reducing drag. Light attachment points are laser-cut into the fabric, increasing rider safety without adding unnecessary weight. A high-contrast reflective feature is specially designed to enhance visibility in all light conditions. A roll-top closure provides adjustable capacity, and tailored webbing, straps and buckles shed extra weight, while ensuring the simplest setup for ease of use, when every second matters. Materials The Racing Saddle Pack is made from Hexalon, a bespoke laminated fabric developed specifically for Apidura. Designed to fit the demands of ultra-distance competition and audax, the material is waterproof and lightweight, with strong tear and abrasion resistance. The attachment points are reinforced with Hypalon, a durable rubberized nylon that provides extra protection against friction and puncture. For the fastening system, we’ve chosen Woojin buckles for strength and reliability.

This carbon Mukluk specific frame bag incorporates the best features of our classic Ranger frame bag. This frame bag is for the 2017-2021 year models of the Salsa carbon Mukluk. Your frame size correlates to the frame bag size; a small fits a small carbon Mukluk. If you have an aluminum Mukluk, we recommend the Ranger. Features: - Revelate exclusive RevX-PAC panels that are 2 times as abrasion resistant as standard VX material. - Zipstretch construction pairs a bomber, wetsuit style molded-tooth zipper with our exclusive stretch Cordura panels that reduce zipper stress when closing bag. - Industry leading #10 Molded tooth zippers with urethane coated tape are basically impervious to dirt and grit that destroy more commonly used water resistant coil zippers. - Exit port in main compartment for hydration tube or wires. - Zippered left side pocket on sizes SM-XL. - Bags feature one main compartment with vertical divider. - Expanding taper front section for increased volume at head tube. - Stretch mesh internal pocket. - Front top tube attachments accommodate top tube packs. Weight: - SM: 11 oz - MD: 12 oz - LG: 13 oz - XL: 15 oz Materials: - RevX-Pac Fabric: Dimension Polyant VX-21 with proprietary abrasion resistant finish; 1050 denier domestic ballistics nylon; 420 denier diamond ripstop lining; closed cell foam padded tube sections. Made in the USA with domestic and imported materials. These frame bags are manufactured and distributed by Revelate Designs and have no affiliation with Salsa Cycles. Salsa Cycles is a trademark of Quality Bicycle Products.

A Weather-Tight Hydration Pack For Unpredictable Adventures Adventure riding is synonymous with mixed weather and unknown trail conditions. The Seeker 10L Bike Hydration pack offers the weatherproof storage to take on winter rides and unknown spring weather. It has all the bike-centric features you expect in a Dakine pack including helmet carry straps, a breathable back panel and dedicated storage for sunglasses. - Limited Lifetime Warranty - 3L / 100oz Hydrapak lumbar reservoir with quick disconnect - High-flow Blaster bite valve with shut-off and magnetic hose clip - Lightweight, weather-tight construction - AirLite Suspension backpanel - Breathable ergonomic shoulder straps with sunglasses quick stash - Zippered hipbelt pockets - Padded, fleece sunglasses/phone pocket - Internal organizer pockets - Deployable helmet carry - External carry straps - Reflective logo

ORTLIEB's frame bag with roll closure helps you start off your bike packing adventure well-prepared. Thanks to the waterproof roll closure —which is closed by three silicone rings— paired with the proven nylon fabric, your luggage inside the bag stays absolutely dry even in the most adverse conditions. The Frame-Pack RC is ideal for storing heavy luggage, such as tools or food, centrally on the bike. This maintains a low center of gravity so that the trail fun remains high even when fully loaded. The roll closure and its large opening allow easy access and easy packing of the bag. The assembly within the frame triangle is done with strong and robust Velcro fasteners. The specific positioning of the Velcro straps along the circumference of the bag enables individual adjustment to the dimensions of your bike. The Frame Pack RC is available in two sizes —4 and 6 liters — and suitable for mounting on carbon frames. The bag is PVC-free and sustainably made in Germany. FEATURES: - Reflective logo on both sides of the bag

The Frame-Pack RC Toptube is the solution for everyone who likes to have access to their water bottles while also carrying gear inside the bike frame triangle. This waterproof frame bag with roll closure is also ideal for full suspension mountain bikes, where space inside the frame's triangle is limited by the shocks. Part of ORTLIEB's bikepacking series, this bag with roll closure meets the IP64 standard for waterproofness, meaning your gear is fully protected from an involuntary bath. With its 4 liter volume, the Frame-Pack RC Toptube enables heavy equipment such as tent poles, tools or food to be carried within the frame triangle, maintaining the bike's low center of gravity. The customizable, sturdy, and strong Velcro fasteners enable simple and easy fastening and an uncomplicated installation. The frame pack RC Toptube is made in Germany and PVC-free. Together with the other products from the ORTLIEB bikepacking series, the frame pack RC Toptube forms the ideal equipment for an overnighter, a self-supported race, or your next big adventure. FEATURES: - Reflective logo on both sides of the bag

WATERPROOF HANDLEBAR BAG WITH QUICK RELEASE! A new fastening system, the Bar-Lock, enables the waterproof Handlebar-Pack QR (Quick Release) to be attached and removed in no time at all. This means that you can quickly and easily take off the bag and carry it with you when you reach your destination. Thanks to the bar-lock cord attachment, this bikepacking bag remains stable and secure on the handlebars, even on rougher terrain. Internal compressions and the roll closure adjustable height ensures the safe storing of gear or equipment. Two further hooks with CamLock fasteners on the front create further compression options. The handlebar pack QR has an 11-liter volume, weighs only 530 grams and is loaded from above. In addition to bikepacking, this pack would be a great asset for long gravel rides or races thanks to its narrow 32 centimeter design. Lateral outer pockets allow small accessories or snacks to be stowed away yet accessible while riding. The PVC-free bag is made of abrasion-resistant nylon fabric and is, of course, sustainably produced in Germany. The maximum load is five kilograms. Pair the bag with the extra Handlebar-Pack QR Inner Pocket to keep things tidy, and conveniently store and access your cash, cards or a mobile phone. - Reflective Logo and Reflector increase safety

Surly's burly line of tubular chromoly steel racks have been used on expeditions all over this planet for years.This Surly Rear Disc Rack is made of tubular chromoly steel and is specifically designed to fit frames with seatstay-mounted disc brakes like the Straggler (650B and 700c), Krampus, and Karate Monkey. - Tubular chromoly rack, stainless-steel hardware - Height-adjustable to accommodate 26-29" wheels - Hardware housed in reusable Surly Tool Bag

Bring your best friend. Dog. Cat. Bunny. Iguana. Whatever. Don't leave home without them! Now your BFF can tag along on every ride to the farmers market, dog beach, or local pub. Bring your four-legged friend along for your two-wheeled ride. - Allows pets to enjoy the ride while protecting them from jumping out - Made of durable, non-toxic plastic - Wire dome made of steel and cushion for comfort - 33 lbs. capacity - Complete with an MIK system - For bikes without an MIK-compatible rack, the MIK Carrier Plate can be purchased separately - Compatible with select Electra bike models - Dimensions: 43 x 33 x 22cm

If you like to ride useful bikes, racks make a lot of sense. Surly's 24-Pack Rack ups the useable cargo space on your bike, providing more real estate for more stuff: more beer, more food, more random bits from the hardware store, more whatever. It’s manufactured from cromoly tubing and uses stainless steel hardware. And it offers height adjustability, so you can keep your cargo close to the ground and stable. It has plenty of braze-ons, too, so you can customize how you secure your cargo…or just light your bike up like the space station. The 24-Pack Rack attaches to most forks that feature mid-blade and crown eyelets. It gives you a stable, rigid assembly upon which you might place your burden. No one likes a sweaty back and a sore bottom, so take your stuff out of that messenger bag and put it on the front of your bike. The 24-Pack Rack is rated to carry 30lbs (13.6kg) and comes in black or silver.

This expedition-worthy rack is made from 4130 chromoly, so it's tough, light and easily repairable in the field. It's also height-adjustable, so you can get your center of gravity as low as possible for a stable ride. The provided stainless steel hardware enables you to attach your rack to virtually any frame with 26-inch, 700c and 29-inch wheels. And, it hauls up to 80 pounds of gear and is powder-coated to protect it from the elements.

Our bestselling M.U.L.E. hydration pack has been part of your dependable support crew for years, but it was time for a tune-up. Enter the M.U.L.E. Pro 14. The same great pack you know and trust with the all-new Air Support Back Panel, plus a few essential additions to take your ride to the next level. Designed with body mapping technology to address areas that retain the most heat, maximum air flows across the back panel to provide comfortable cooling. A lightweight and breathable 3D vent mesh harness helps to keep your load light. A large capacity 3-liter Crux Reservoir, hip belt with cargo carry, and bike tool organizer makes it easy to plan for a full day's ride. Upgrade to max performance—this pack is also Impact Protector ready and e-bike battery compatible so you can go all out. - Air Support Pro Back Panel: Designed with body mapping technology to identify and ventilate the areas of the body that generate the most heat. Lightweight and breathable high pile mesh construction. - 3D Vent Mesh Harness: Lightweight and breathable with added cargo. Designed for all-day comfort. - Hip Belt With Cargo: Added stability and quick access to essentials - Helmet Carry: Stow and secure helmet - Integrated Tool Roll: Keep your CO2 cartridges, multi-tool, and tire levers safe and secure - Adjustable Sternum Strap: Offers a range of adjustments for a custom fit and increased stability - Impact Protection Ready: Compatible with the CamelBak Impact Protector (sold separately) - E-Bike Battery Sleeve: Securely and safely ride with a second e-bike battery for all-day adventures - Stretch Overflow Pocket: Quickly stash or shed an extra layer - Cargo Compression: Cinch down jackets or other items to keep the footprint small - Soft Lined Pocket: Keep your glasses or goggles safe and scratch-free - Magnetic Tube Trap Management: Keeps your tube secure and accessible when you need it - Reflectivity: For low-light safety - Light Loop: Clip on a light to make the ride to and from the trailhead safe - Armor Carry: Stow and secure knee and elbow pads on the climbs

The waterproof ORTLIEB Handlebar-Pack is an indispensable item when you're on a bikepacking tour in the great outdoors. This Handlebar-Pack offers a payload of 9 liters for your sleeping bag and pad. It also helps to secure a balanced distribution of gear and weight across your bike. Thanks to the roll closures at both ends, you can always gain quick access to your gear. Compression belts on the outside enable the stowing and attachment of additional equipment. Moreover, the Handlebar-Pack comes with four hooks to enable the attachment of an ORTLIEB Accessory-Pack for additional storage space. Consisting of spacers and two strong Velcro straps, the mounting system ensures secure attachment to any handlebar type, including carbon handlebars. The pack's stiffened interior and head-tube attachment offer additional stability – in any terrain. This 9L model belongs to the compact class of bikepacker handlebar rolls. With a length of only 40cm, this waterproof handlebar bag is the right choice for bikepackers with off-road drop bars and both racing and hybrid-style handlebars. This compact Handlebar-Pack is also extremely lightweight. FURTHER FEATURES: - Hooks for attaching an ORTLIEB Accessory-Pack - Also suitable for carbon handlebars - Mounting straps with convenient Velcro closures - Lightweight design - High luminosity 3M Scotchlite reflectors

The women's-specific Raven 14 is a premium pack made for high-quality mountain bikers who desire high-quality gear. It can haul everything you need for high country excursions with the flexibility to accommodate shorter rides—and less gear—too. We set out to solve the issue of bouncy hydration packs, and found the answer in our BioStretch harness—a wing-shaped shoulder strap solution that takes the same shape you do when you're in a natural riding position. Unparalleled stability meets maximum comfort and ventilation with an AirScape suspension system and backpanel. An included 2.5-liter reservoir slips into its own hydration sleeve with direct-zip access, and a space at the bottom of the pack is reserved for a removable Tool Roll. Standard and full-face helmets can be secured to the pack via the LidLock attachment or side compression straps. TOOL ROLL - Never dig for your tools again. The dedicated lower compartment holds a removable pouch to organize your tools so you can get back to what matters—the ride. RESERVOIR INCLUDED - Osprey Hydraulics LT 2.5L reservoir keeps you hydrated all day long and stores in a dedicated hydration compartment with direct-zip access and sternum strap magnetic bite valve. LIDLOCK - Attach your helmet securely to the outside of your pack without wasting the space inside. Perfect for wrapping up a long ride at your local brewery. RIDE STABILITY - Our new "winged" harness wraps the upper shoulders for added stability and keeps the pack comfortably close to your body. FEATURES - Women's-specific fit and sizing - Countouring AirScape backpanel and bike-specific shape harness - Included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Hydration sleeve with direct-zip access and hose path for easy loading - Lightweight sternum strap magnet for easy access to water - Scratch-free, heat-embossed zippered slash pocket - Stretch mesh zippered hipbelt pockets - LidLock bike helmet attachment - Stretch mesh front pocket for quickly stashing extra gear - Blinker light attachment and reflective patch for safety - Removable roll-up tool pouch keeps tools handy and organized - Bike tool organization in main compartment AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Mesh-covered, extra deep ridged foam allows maximum ventilation while keeping the load close to the body BIOSTRETCH HARNESS - Osprey engineered bike-specific harness with winged shoulder strap shape contours the shoulder providing superior comfort and stability - Soft breathable spacermesh contact surfaces and die-cut foam ventilation HIPBELT - Airmesh wrap hipbelt with zippered pockets provide stability and breathability

The CoolKASE is a soft cooler that that is mountable to the front or rear rack of a bicycle, ATV’s, scooters, kayaks, and other forms of transportation. This portable cooler is a great way to store drinks and food for a picnic, a day of fun in the sun or when you go camping! You pick the adventure, the CoolKASE is always ready to GO! Product Features: - Mountable to any type of rack on a bicycle, ATV, scooter, moped, kayak, or any other form of transportation - Tiny but mighty! Holds up to twelve 16-ounce bottles and up to 5 pounds of ice (800 cubic inches) - Inside dimensions 8? x 11? x 9? - Waterproof liner - Puncture resistant outer shell (made with reinforced scrim material) - Multi-use straps and hooks - Easy to clean - Light to carry - Simple to store - Overall construction is RF welded to make it extra durable and watertight when upright - Includes a very useful bottle opener! - Reflective accents for safety when traveling at night

The Urbanator bag is ideal for cyclists and commuters for taking their stuff around town or on some journey. This backpack-style bag has ample room for 2 days of clothes, an extra pair of shoes, and a 16" laptop. It features a padded laptop compartment and two additional pockets for small electronics or sunglasses, and 2 bottle holders. The bag's attached shoulder straps conveniently tuck away into a built-in storage pouch and are out of the way while mounting to a bike rack. The Urbanator mounts to most bike racks and has locking features to keep your bag secure. Made of water-resistant and easily cleanable material with an added weather-resistant rain fly. Converts from pannier to backpack in seconds! Designed by cyclists for cyclists! - Shoulder straps stow away in a compartment when used as a pannier - Multiple pockets for easy organization - High-visibility rain cover and reflective accents - Rack locks for secure mounting - Oversized, glove-friendly zipper pulls - Padded compartment fits 16" laptops - Opens like a book for easier packing & organization - Made of water-resistant PVC/TPU - Dimensions: 17" x 10" x 8" - 1350 cubic inches or 22 liters

The Transit Backpack is a convertible backpack with enough space for the workday or weekend adventures. Organizational pockets keep everything in place while the large main compartment zips open for more than enough room for a change of clothes, footwear, and the day’s fuel. Transport your gear with the backpack straps, side carry handle, or easily mount to the Travoy lower deck for a bike cargo trailer experience. Features: - 28-liter main compartment with full zip opening for easy access of ample storage - Water-resistant fabric with a tarpaulin bottom for additional protection - Dedicated padded laptop compartment (up to 15.6") for safe and secure storage - Stowable shoulder straps with sternum strap tuck away when not in use - Stowable bag clips (4) for Travoy bike trailer connection - Side zip pocket is readily accessible for quick stops - Mesh side pocket for water bottle - Breathable back panel - Fleece-lined exterior zip pocket for quickly accessing smaller items - Front organization pocket including utility clip for keys keeps everything in its place - Interior zip pockets for smaller items - Top and side carry handles for easy grab and go - Light loop for accessory lighting - Compatibility: 2010 – Current Travoy Specifications: - Volume (Liters): 28 - Weight (lbs/kg): 2.18 / 0.99

The AIRBORNE 15 is the choice to pick if you're that hard core mountainbike type of rider going on a wild all day adventure. This mountainbike backpack is equipped with our bounce free No Dancing Monkey (NDM) 4-point harness system, which makes the pack stay snug on you with no bounce even in the most brutal of terrains. - Zero bounce with NDM 1.2 harness - Our patented harness system with 4-point performance suspension - 3.0L / 100oz-Elite hydration bladder with plug-n-play coupling included - 15 Liter of storage-Bring plenty of gear, food and hydration for your big ride.

The EXP Series Framepack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - Tapered at the front and along the bottom for maximum carrying capacity - Fits Woodsmoke, Timberjack, and Fargo bikes

The Drafter 14L meets all your mountain bike backpack needs from hydration to protection in a breathable design. Stay hydrated on the move with the 3-liter Hydrapak reservoir, located on the lumbar for a lower center of gravity, with a high-flow bite valve. Stay cool and comfortable thanks to the air suspension back panel and breathable ergonomic shoulder straps. The main pocket holds extra layers, while the front pocket features an organized home for all your tools, replacement parts, and necessities. Additional features include spine protection compatibility, an external helmet carry, plus deployable armor carry straps. - 3L / 100 oz Dakine x Hydrapak 3D lumbar reservoir w/quick disconnect - High-flow Blaster bite valve w/shut-off and magnetic hose clip - AirLite Suspension back panel - Breathable ergonomic shoulder straps w/sunglasses quick stash - Zippered hip belt pocket - Separate cargo and hydration compartments - Internal ebike spare battery storage system - Padded, fleece sunglasses/phone pocket - Internal organizer pockets - Deployable external carry straps - Front quick stash & compression panel - Reflective panel and safety light attach - DK Impact Spine protector compatible (not included)

Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g

- Double bicycle bag, water-repellent polyester - Reflective stripes - Elastic bottle bands inside - Main compartment with pull cord - MIK system carriers/carrier plates, incl. MIK Adapter plate (70171) - 32L

- Waterproof (IPX3) - Welded construction - 100% tarpaulin - LED mounting possibility - 50L capacity - Strap mounting system - Aluminum buckle - 50L

Let's face it, not every ride happens the way we want it to. Your bike can break, the weather can change, and the trail may not be as well-marked as you'd like it to be. The Raptor 10 is specifically designed with these challenges in mind. A premium pack that carries it all without weighing you down, the Raptor features winged shoulder straps that contour to the shape you're in when you reach for your handlebars—delivering superior stability even when the trail turns super techy. AirScape suspension evenly distributes your load while permitting dynamic range of motion, and a mesh-covered foam backpanel leaves you well ventilated. An included 2.5-liter reservoir slides into its own dedicated compartment for fill-up simplicity, and another devoted space at the base of the pack houses a Tool Roll for your mini-pump, tire lever, hex keys, and more. TOOL ROLL - Never dig for your tools again. The dedicated lower compartment holds a removable pouch to organize your tools so you can get back to what matters—the ride. RESERVOIR INCLUDED - Osprey Hydraulics LT 2.5L reservoir keeps you hydrated all day long and stores in a dedicated hydration compartment with direct-zip access and sternum strap magnetic bite valve. LIDLOCK - Attach your helmet securely to the outside of your pack without wasting the space inside. Perfect for wrapping up a long ride at your local brewery. RIDE STABILITY - Our new "winged" harness wraps the upper shoulders for added stability and keeps the pack comfortably close to your body. FEATURES - Countouring AirScape backpanel and bike-specific shape harness - Included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Hydration sleeve with direct-zip access and hose path for easy loading - Lightweight sternum strap magnet for easy access to water - Scratch-free, heat-embossed zippered slash pocket - Stretch mesh zippered hipbelt pockets - LidLock bike helmet attachment - Stretch mesh front pocket for quickly stashing extra gear - Blinker light attachment and reflective patch for safety - Removable roll-up tool pouch keeps tools handy and organized - Bike tool organization in main compartment AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Mesh-covered, extra deep ridged foam allows maximum ventilation while keeping the load close to the body BIOSTRETCH HARNESS - Osprey engineered bike-specific harness with winged shoulder strap shape contours the shoulder providing superior comfort and stability - Soft breathable spacermesh contact surfaces and die-cut foam ventilation HIPBELT - Airmesh wrap hipbelt with zippered pockets provide stability and breathability

When you're out for an all-day ride—or when your ride unexpectedly turns into an all-dayer—you need a pack that carries everything without weighing you down. The women's-specific Raven 10 is stable, comfortable, and specifically designed with mountain bike challenges in mind. You want a pack that doesn't bounce all over the place, and so do we. So, we made one. The shoulder straps on this pack are shaped like wings and naturally curve when you resume your natural riding position. An AirScape suspension system and backpanel keep your bag close to your body while allowing for dynamic body movement and unmatched comfort and ventilation. An integrated 2.5-liter reservoir keeps you hydrated, and a dedicated compartment at the bottom of the pack holds a Tool Roll that conveniently stores everything from mini-pumps to tire levers and more. TOOL ROLL - Never dig for your tools again. The dedicated lower compartment holds a removable pouch to organize your tools so you can get back to what matters—the ride. RESERVOIR INCLUDED - Osprey Hydraulics LT 2.5L reservoir keeps you hydrated all day long and stores in a dedicated hydration compartment with direct-zip access and sternum strap magnetic bite valve. LIDLOCK - Attach your helmet securely to the outside of your pack without wasting the space inside. Perfect for wrapping up a long ride at your local brewery. RIDE STABILITY - Our new "winged" harness wraps the upper shoulders for added stability and keeps the pack comfortably close to your body. FEATURES - Women's-specific fit and sizing - Countouring AirScape backpanel and bike-specific shape harness - Included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Hydration sleeve with direct-zip access and hose path for easy loading - Lightweight sternum strap magnet for easy access to water - Scratch-free, heat-embossed zippered slash pocket - Stretch mesh zippered hipbelt pockets - LidLock bike helmet attachment - Stretch mesh front pocket for quickly stashing extra gear - Blinker light attachment and reflective patch for safety - Removable roll-up tool pouch keeps tools handy and organized Bike tool organization in main compartment AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Mesh-covered, extra deep ridged foam allows maximum ventilation while keeping the load close to the body BIOSTRETCH HARNESS - Osprey engineered bike-specific harness with winged shoulder strap shape contours the shoulder providing superior comfort and stability - Soft breathable spacermesh contact surfaces and die-cut foam ventilation HIPBELT - Airmesh wrap hipbelt with zippered pockets provide stability and breathability

Load up and go! Salsa's Wanderlust HD Rear Rack is built from chromoly steel for real-world strength. A large deck teams up with multiple cross bars for securing panniers and other gear. To get you going, a mounting kit is included, and to help you stay visible, there's also a taillight mounting bracket.

Patented rack attachment system works on virtually any bicycle from full-suspension mountain bikes to commuters and everything in between. - Patented attachment system secures easily - Tough construction allows for variety of rugged riding uses - Silent and vibration free performance - Includes rails for mounting panniers - Works on the rear seat stays and front fork - Works with any type of frame material

Topeak's MTX TrunkBag DXP boasts a pop-up main compartment and expandable side panniers so it's capable of carrying plenty of gear. Plus it's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, bottle holder, taillight clip and top elastic straps. There are even reflective strips for safety. And, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately).

This is probably THE perfect 9L daypack designed to carry your personal gear and hydration while you're bombing the hills during the 1-day adventure or the gnarly enduro race. This mountainbike backpack is equipped with our bounce free No Dancing Monkey 4-point harness system, which makes the pack stay snug on you with no bounce even in the most brutal of terrains. The pack will not make you less dirty (because that's totally impossible) but it will make you enjoy the ride! - Zero bounce with NDM 1.0 harness - Our patented 4-point harness system for an absolute perfect fit with zero bounce - 3.0L/100oz Elite hydration Bladder-Keep your tube in a secure and accessible position - 9L storage-With several smart attachment points for your full-face helmet, knee and elbow pads.

The men's Syncline bike hydration pack is sized for everyday riding. The 12-liter pack has just the right amount of storage space for essential tools, snacks, and layers plus a lumbar reservoir that keeps the load low and stable. Our proven Air Flow back panel and shoulder strap designs deliver breathable comfort. - 3L / 100oz Dakine x Hydrapak 3D lumbar reservoir w/quick disconnect - High-flow Blaster bite valve w/shut-off and magnetic hose clip - Breathable Air Flow back panel and shoulder straps - DK Impact CE-certified Spine protector compatible (not included) - Front helmet attachment loops - Deployable armor carry straps - Fleece-lined sunglass pocket - Mesh side pocket - Internal organizer pockets - Safety light attachment - Integrated rescue whistle

Sized for longer days and adventurous rides, the 16-liter Syncline bike hydration pack features a lumbar reservoir and plenty of storage space. The lumbar reservoir design adds load stability on the trail. The pack has all the space you need for the tools, snacks, and layers to take on bigger days plus the straps to manage armor and helmet. Our proven back panel and shoulder strap designs deliver breathable comfort. - 3L / 100 oz Dakine x Hydrapak 3D lumbar reservoir w/quick disconnect - High-flow Blaster bite valve w/shut-off and magnetic hose clip - Breathable Air Flow back panel and shoulder straps - DK Impact CE-certified Spine protector compatible (not included) - Front helmet attachment loops - Deployable armor carry straps - Fleece-lined sunglass pocket - Dual side pockets - Internal organizer pockets - Safety light attachment - Integrated rescue whistle

The Bontrager Commuter Double Pannier delivers versatile capability to your bike so you can carry more and ride more. The integrated MIK mounting system makes installation and removal a breeze with compatible MIK racks. Additional accessory pockets and an easy-to-load main compartment add functionality to this durable, symmetric design made from waterproof materials. - MIK mounting system provides secure, integrated mounting with compatible racks - Made from durable, waterproof material to help keep your gear safe - Large compartment holds shape for easy loading and unloading with roll-top buckle closure - External pockets and compartments help organize accessories and gear - Sturdy handle pairs with MIK system to make this double pannier easy to remove and carry - Reflective materials enhance visibility with a stylish finish

- The perfect quick-mount front rack system for road, cross, hybrid or touring bikes with rigid forks. This one-size-fits-all front rack features an innovative top plate that adjusts to level independent the fork angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags.

- The perfect quick-mount rear rack system attaches to road, cross, hybrid or touring bike seatstays. This one-size-fits-all front rack features an innovative top plate that adjusts to level independent the seatstay angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags.

Ideal for carrying lightweight, compressible kit, the Expedition Handlebar Pack is a handy partner for long-distance road tours, weekend trips, or even a daily ride to work. Eliminating the need for a bulky front rack, the Pack fastens to handlebars with a reinforced attachment system that adds stability while improving handling and preventing abrasion. Dual roll-top closure keeps the contents secure, while allowing flexible packing capacity. A hands-free air release vent makes compressing the Pack hassle-free, while welded seams ensure that contents stay dry in all conditions. Materials The Expedition Handlebar Pack is cut from a three-layer laminate fabric that was developed specifically for Apidura. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures complete waterproofing. The Handlebar Pack’s attachment points are reinforced with Hypalon, a rubberized nylon used to provide extra protection against friction and abrasion. For the straps, we’ve chosen Woojin buckles for their strength and reliability.

Designed for the needs of ultra-distance cycling competition and audax, the Racing Frame Pack utilizes the area inside a bike’s main triangle, creating a lower center of gravity and enabling more neutral handling. This makes it useful for storing heavier, bulkier items, as well as items that need to be accessed on the go. The waterproof frame bag is constructed from a lightweight laminate created specifically for Apidura, and has been shaped to provide a universal fit, for use with any frame. The three Velcro straps are lightweight, easy to use, and can be set in multiple positions to ensure compatibility when used alongside a top tube bag. An integrated support structure adds stiffness and allows the frame bag to be exceptionally minimal and lightweight, and a flexible pocket divider securely holds contents in place. For added convenience, a protected cable port enables charging of devices on the go. Features - Universal fit across most frame sizes and styles - Overall low weight less than 205g - Constructed from an ultralight waterproof laminate, developed specifically for Apidura - High-contrast reflective graphics for increased visibility - Protected electronics port - Integrated thermoset material adds stiffness and strength Materials - The frame bag is made from Hexalon, a bespoke laminated fabric developed specifically for Apidura. Designed to fit the demands of ultra-distance cycling competition, the material is waterproof and lightweight, with strong tear and abrasion resistance. - An integrated thermoset structure is fully bonded to the inside of the bag, adding stiffness and allowing the bagto be minimal and lightweight. Care - Wash the Racing Frame Pack by hand, using a mild diluted soap if necessary. Afterwards, let it air dry. - Do not machine wash, machine dry, or iron.

The Drafter 10L meets all your mountain bike backpack needs from hydration to protection in a compact, breathable design. Stay hydrated on the move with the 3-liter Hydrapak reservoir, located on the lumbar for a lower center of gravity, with a high-flow bite valve. Stay cool and comfortable thanks to the air suspension back panel and breathable ergonomic shoulder straps. The organizer pocket features a home for all your tools, replacement parts, and necessities. Additional features include spine protection compatibility, an external helmet carry, plus deployable armor carry straps. - 3L / 100 oz Dakine x Hydrapak 3D lumbar reservoir w/quick disconnect - High-flow Blaster bite valve w/shut-off and magnetic hose clip - AirLite Suspension back panel - Breathable ergonomic shoulder straps w/sunglasses quick stash - Separate cargo and hydration compartments - Internal ebike spare battery storage system - Padded, fleece sunglasses/phone pocket - Internal organizer pockets - Deployable external carry straps - Front quick stash & compression panel - Reflective panel and safety light attach - DK Impact Spine protector compatible (not included)

The Drafter 10L Women's Backpack meets all your mountain bike backpack needs, combining all the best technical bike pack features in a low-profile, women's-specific silhouette. Stay hydrated on the move with the 3-liter Hydrapak reservoir, located on the lumbar for a low center of gravity, with a high-flow bite valve. Stay cool and comfortable thanks to the shorter torso length, Air Suspension back panel, and S-shaped breathable shoulder straps. The organizer pocket features a home for all your tools, replacement parts, and necessities. Additional features include spine protection compatibility, external helmet carry, and deployable armor carry straps. - Women's-specific fit - 3L / 100 oz Dakine x Hydrapak 3D lumbar reservoir w/quick disconnect - High-flow Blaster bite valve w/shut-off and magnetic hose clip - AirLite Suspension back panel - Breathable ergonomic shoulder straps w/sunglasses quick stash - Separate cargo and hydration compartments - Internal ebike spare battery storage system - Padded, fleece sunglasses/phone pocket - Internal organizer pockets - Deployable external carry straps - Front quick stash & compression panel - Reflective panel and safety light attach - DK Impact Spine protector compatible (not included)

This highly ventilated and lightweight women's-specific pack is just the right size for carrying everything you need for an all-day ride. A BioStretch harness offers superior stability in the form of winged shoulder straps that curve just as you do when you're reaching for your handlebars. When things get steamy, a breathable 3D AirSpeed tensioned mesh backpanel means you'll feel the wind coming down your back. Front and side pockets make organizing smaller items easy, a LidLock attachment point secures your helmet to your pack, and a removable raincover keeps everything dry should the skies open up on you. AIRSPEED VENTILATION - Tensioned backpanel reduces sweating, and the LightWire frame takes the weight off your shoulders and transfers it to your hips to provide stable, comfortable, and ventilated carry. INTEGRATED RAINCOVER - A little weather shouldn't stop anyone from riding. The integrated high-visibility raincover keeps your pack and gear dry on your ride from start to finish. RIDE STABILITY - Our new "winged" harness wraps the upper shoulders for added stability and keeps the pack comfortably close to your body. FEATURES - Women's-specific fit and sizing - Maximum ventilation with AirSpeed backpanel and bike-specific shaped harness - Dedicated hydration compartment with included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Front stretch mesh pocket - Scratch-free, heat-embossed zippered slash pocket - LidLock helmet carry - Blinker light attachment - Integrated removable high-visibility raincover - Magnetic sternum strap for quick access to reservoir bite valve - Zippered tool organization pocket - Dual stretch mesh side pockets - Dual upper and lower side compresion straps - Padded spacermesh hipwings with webbing ErgoPull waist strap provides comfort and stability AIRSPEED SUSPENSION - Peripheral LightWire frame creates a platform for a contoured tensioned mesh backpanel AIRSPEED BACKPANEL - 3D-tensioned breathable mesh backpanel provides extreme ventilation with a comfortable fit BIOSTRETCH HARNESS - Osprey engineered bike-specific harness with winged shoulder strap shape contours the shoulder providing superior comfort and stability - Soft breathable spacermesh contact surfaces and die-cut foam ventilation

Whether you're bagging peaks or bikepacking, the Talon 22 is the perfect carry solution. This lightweight pack features a breathable, close-to-body AirScape backpanel and continuous-wrap harness and hipbelt that moves with you. Trekking pole, ice axe and bike helmet attachment points make this a truly multi-sport pack. Constructed with high-quality bluesign-approved recycled high-tenacity nylon. AirScape Suspension An injection-molded, die-cut foam AirScape backpanel creates a breathable, close-to-body fit. A flexible BioStretch harness and hipbelt, with a continuous lumbar-to-hipbelt wrap, allow for dynamic movement. Light and Fast A lightweight pack series designed with optimal stability for dynamic movement even on the most technical terrain. Multi-Sport From top-loaders to lumbar packs and everything in between, the Talon/Tempest Series accommodates the needs of hikers, bikers and more Sustainable Materials Constructed with high-quality bluesign-approved recycled high-tenacity nylon. - Dual-zippered panel access to main compartment - Internal zippered mesh pocket with key clip - Tuck-away ice ax attachment with bungee tie-off - Stow-on-the-Go trekking pole attachment - Top panel zippered slash pocket - LidLock bike helmet attachment - Lower side compression straps - Side stretch mesh pockets - External hydration reservoir sleeve - Easy-access, expandable stretch mesh harness pocket - Dual-zippered fabric hipbelt pockets - Blinker light attachment (light not included) - Large stretch mesh front panel pocket AirScape Backpanel - Injection-molded AirScape framesheet with die-cut foam provides a close-to-body stable fit while offering flexibility and ventilated airflow channels for active use - Mesh-covered foam lumbar for lightweight and comfortable contact surfaces BioStretch Harness - Integrated BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement - Spacermesh over die-cut foam provides breathable, comfortable contact surface - Harness system easily adjusts to fit various torso lengths - Adjustable sternum strap with safety whistle buckle BioStretch Hipbelt - Seamless lumbar-to-hipbelt body wrap and BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement - Spacermesh over die-cut foam provides breathable, comfortable contact surface Crossbody ErgoPull hipbelt system to pull lumbar into body

The Tempest 20 is the perfect panel-loading, day-hiking, biking or peak-bagging carry solution with a women's-specific fit. Featuring a continuous-wrap harness and hipbelt and injection-molded AirScape backpanel that moves as you move down the trail. Attachment for trekking poles, an ice axe, a bike helmet and blinky light make this lightweight pack one of the most versatile technical pack series ever created. Made from high-quality bluesign-approved recycled high-tenacity nylon. Airscape Suspension An injection-molded, die-cut foam AirScape backpanel creates a breathable, close-to-body fit. A flexible BioStretch harness and hipbelt, with a continuous lumbar-to-hipbelt wrap, allow for dynamic movement. Light and Fast A lightweight pack series designed with optimal stability for dynamic movement even on the most technical terrain. Multi-Sport From top-loaders to lumbar packs and everything in between, the Talon/Tempest Series accommodates the needs of hikers, bikers and more. Sustainable Materials Constructed with high-quality bluesign-approved recycled high-tenacity nylon. - Dual-zippered panel access to main compartment - Internal zippered mesh pocket with key clip - Tuck-away ice ax attachment with bungee tie-off - Stow-on-the-Go trekking pole attachment - Top panel zippered slash pocket - LidLock bike helmet attachment - Lower side compression straps - Side stretch mesh pockets - External hydration reservoir sleeve - Easy-access, expandable stretch mesh harness pocket - Dual-zippered fabric hipbelt pockets - Blinker light attachment (light not included) - Large stretch mesh front panel pocket Airscape Backpanel - Injection-molded AirScape framesheet with die-cut foam provides a close-to-body stable fit while offering flexibility and ventilated airflow channels for active use - Mesh-covered foam lumbar for lightweight and comfortable contact surfaces Biostretch Harness - Integrated BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement - Spacermesh over die-cut foam provides breathable, comfortable contact surface - Harness system easily adjusts to fit various torso lengths - Adjustable sternum strap with safety whistle buckle Biostretch Hipbelt - Seamless lumbar-to-hipbelt body wrap and BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement - Spacermesh over die-cut foam provides breathable, comfortable contact surface Crossbody ErgoPull hipbelt system to pull lumbar into body